Mô tả sản phẩm
Product portfolio
Safety-related parameters
| MTTFd: mean time to dangerous failure | 65 years (EN ISO 13849) 1) |
- 1) This product is a standard product and does not constitute a safety component as defined in the Machinery Directive. Calculation based on nominal load of components, average ambient temperature 40?C, frequency of use 8760 h/a. All electronic failures are considered hazardous. For more information, see document no. 8015532.
Performance
| Measuring length | ? 3,920 mm |
| Resolution | 1 ?m |
| Length of period | 1 mm |
| Traversing speed |
< 10 m/s, dynamic operation (Sin/Cos) < 2 m/s, static operation (SSI) |
| Repeatability | ? ? 2 ?m |
| System accuracy | ? 10 ?m |
Interfaces
| Communication interface | SSI |
| Interface, digital serial |
SSI, 24 Bit, gray Sin/Cos 1.0 VPP |
Electrical data
| Supply voltage | 4.5 V … 30 V |
| Operating current | 55 mA (without load) |
| Power consumption | ? 1.2 W |
| Connection type | Male connector, M12, 12-pin |
| MTTFd: mean time to dangerous failure | 65 years (EN ISO 13849) 1) |
- 1) This product is a standard product and does not constitute a safety component as defined in the Machinery Directive. Calculation based on nominal load of components, average ambient temperature 40?C, frequency of use 8760 h/a. All electronic failures are considered hazardous. For more information, see document no. 8015532.
Mechanical data
| Dimensions | See dimensional drawing |
| Weight | 0.08 kg |
| Read head material | Zinc diecast |
Ambient data
| EMC | According to EN 61000-6-2 and EN 61000-6-3 |
| Enclosure rating | IP67, with mating connector inserted (according to IEC 60529) |
| Operating temperature range | ?30 ?C … +85 ?C |
| Storage temperature range | ?40 ?C … +85 ?C |
| Permissible relative humidity | 100 %, condensation permitted |
| Resistance to shocks | 30 g, 6 ms (EN 60068-2-27) |
| Resistance to vibration | 20 g, 10 Hz … 2,000 Hz (EN 60068-2-6) |
| Maximum permitted ambient field strength | < 3 kA/m ... 4 kA/m (3.8 mT ... 5 mT), to guarantee compliance with the quoted accuracy values 1) |
| Maximum permitted field strength | < 150 kA/m (< 190 mT), to ensure that the magnetic tape is not permanently damaged |
- 1) The maximum permitted external field influence is reached when the position value deviates from the original value (without external field influence) by more than 5 ?m. This value is reached when, at the sensor location, a field strength of 3 kA/m to 4 kA/m (3.8 mT to 5 mT) occurs in addition to the field strength of the magnetic tape.
Classifications
| ECl@ss 5.0 | 27270705 |
| ECl@ss 5.1.4 | 27270705 |
| ECl@ss 6.0 | 27270705 |
| ECl@ss 6.2 | 27270705 |
| ECl@ss 7.0 | 27270705 |
| ECl@ss 8.0 | 27270705 |
| ECl@ss 8.1 | 27270705 |
| ECl@ss 9.0 | 27270705 |
| ETIM 5.0 | EC002544 |
| ETIM 6.0 | EC002544 |
| UNSPSC 16.0901 | 41111613 |
