Mô tả sản phẩm
Product portfolio
Features
| Protective field range | 7 m |
| Warning field range | 49 m (20 m at 20 % reflectivity) |
| Distance measuring range | 49 m |
| Number of simultaneously monitored protective fields | ? 4 1) |
| Type of field set | Triple field sets, dual field sets |
| Number of field sets | 4 |
| Number of fields | 12 |
| Number of monitoring cases | 4 |
| Scanning angle | 180? |
| Resolution (can be configured) | 30 mm, 40 mm, 50 mm, 70 mm, 150 mm |
| Angular resolution | 0.5?, 0.25?, depending on range and resolution |
| Response time | 120 ms 2) |
| Protective field supplement | 100 mm |
| Number of multiple samplings | 2 … 16, configurable |
| Delay of automatic reset | 2 s … 60 s, configurable |
- 1) If several protective fields are monitored simultaneously, the shut-off signals must be connected to safe outputs on a Flexi Soft safety controller or routed via a safe EFI gateway.2) Depending on basic response time and multiple sampling.
Safety-related parameters
| Type | Type 3 (IEC 61496) |
| Safety integrity level |
SIL2 (IEC 61508) SILCL2 (EN 62061) |
| Category | Category 3 (EN ISO 13849) |
| Performance level | PL d (EN ISO 13849) |
| PFHD (mean probability of a dangerous failure per hour) | 8.0 x 10-8 (EN ISO 13849) |
| TM (mission time) | 20 years (EN ISO 13849) |
| Safe state in the event of a fault | At least one OSSD is in the OFF state. |
Functions
| Multiple sampling | ? |
| Monitoring case switching | ? |
| Simultaneous monitoring | ? |
| Static protective field switching | ? |
| Contour as a reference | ? |
| Safe SICK device communication via EFI | ? |
Interfaces
|
|||||||||
|
|||||||||
|
|||||||||
| Configuration method | PC with CDS (Configuration and Diagnostic Software) | ||||||||
|
|||||||||
|
|||||||||
|
|||||||||
- 1) In combination with an EFI device (Flexi Soft or EFI gateway) five static control inputs are available. Otherwise two.2) Freely programmable, e.g. warning field, contamination, reset required.3) For a suitable EFI-gateway see modules and gateways in the accessory section of connection systems.
Electrical data
| Protection class | II (EN 50178) | ||||||||
|
|||||||||
|
|||||||||
|
|||||||||
- 1) At 24 V DC without output load.2) At 24 V DC including maximum output load.3) Freely programmable, e.g. warning field, contamination, reset required.
Mechanical data
| Dimensions (W x H x D) | 351 mm x 265 mm x 221 mm | ||||||
| Weight | 9 kg | ||||||
|
|||||||
| Housing color | RAL 1021 (yellow) | ||||||
| Front screen material | Polycarbonate | ||||||
| Front screen surface finish | Outside with scratch-resistant coating | ||||||
Ambient data
| Enclosure rating |
IP65 (EN 60529) IP67 (EN 60529) |
||||
| Ambient operating temperature | ?30 ?C … +50 ?C | ||||
| Storage temperature | ?30 ?C … +50 ?C | ||||
| Vibration resistance | 5 g, 10 Hz … 150 Hz (IEC 61496, IEC 61496-3) | ||||
|
|||||
Other information
| Type of light | Pulsed laser diode |
| Wave length | 905 nm |
| Detectable remission | 1.8 % … > 1,000 %, reflectors |
| Laser class | 1 (21 CFR 1040.10 and 1040.11, IEC 60825-1) |
Classifications
| ECl@ss 5.0 | 27272705 |
| ECl@ss 5.1.4 | 27272705 |
| ECl@ss 6.0 | 27272705 |
| ECl@ss 6.2 | 27272705 |
| ECl@ss 7.0 | 27272705 |
| ECl@ss 8.0 | 27272705 |
| ECl@ss 8.1 | 27272705 |
| ECl@ss 9.0 | 27272705 |
| ETIM 5.0 | EC002550 |
| ETIM 6.0 | EC002550 |
| UNSPSC 16.0901 | 39121528 |
