Mô tả sản phẩm
Product portfolio
Performance
| Sine/cosine periods per revolution | 1,024 |
| Number of the absolute ascertainable revolutions | 4,096 |
| Total number of steps | 134,217,728 |
| Measuring step | 0.3 ? For interpolation of the sine/cosine signals with, e. g., 12 bits |
| Integral non-linearity | Typ. ? 45 ?, Error limits for evaluating sine/cosine period, without mechanical tension of the stator coupling |
| Differential non-linearity | ? 7 ?, Non-linearity within a sine/cosine period |
| Operating speed | ? 6,000 min??, up to which the absolute position can be reliably produced |
| Available memory area | 1,792 Byte |
Interfaces
| Type of code for the absolute value | Binary |
| Code sequence | Rising, For clockwise shaft rotation, looking in direction ?A? (see dimensional drawing) |
| Communication interface | HIPERFACE? |
Electrical data
| Connection type | Male connector, M12, 8-pin, radial |
| Supply voltage range | 7 V DC … 12 V DC |
| Recommended supply voltage | 8 V DC |
| Output current | < 80 mA (without load) |
| Output frequency for sine/cosine signals | ? 200 kHz |
Mechanical data
| Shaft version | Through hollow shaft |
| Shaft diameter | 12 mm |
| Shaft material | Stainless steel |
| Flange material | Zinc diecast |
| Housing material | Aluminum die cast |
| Flange type / stator coupling | Stator coupling |
| Dimensions | See dimensional drawing |
| Weight | ? 0.25 kg |
| Moment of inertia of the rotor | 40 gcm? |
| Operating speed | ? 9,000 min?? 1) |
| Angular acceleration | ? 500,000 rad/s? |
| Operating torque | 0.6 Ncm (+20 ?C) |
| Start up torque | + 0.8 Ncm (+20 ?C) |
| Permissible movement of the drive element, static |
? 0.3 mm radial ? 0.5 mm axial |
| Permissible movement of the drive element, dynamic |
? 0.05 mm radial ? 0.2 mm axial |
| Life of ball bearings | 3.6 x 10^9 revolutions |
- 1) Take into account self-heating of 3.3 K per 1,000 rpm when designing the operating temperature range.
Ambient data
| Operating temperature range | ?40 ?C … +115 ?C |
| Storage temperature range | ?40 ?C … +115 ?C, without package |
| Relative humidity/condensation | 90 %, Condensation not permitted |
| Resistance to shocks | 100 g, 6 ms (according to EN 60068-2-27) |
| Frequency range of resistance to vibrations | 20 g, 10 Hz … 2,000 Hz (according to EN 60068-2-6) |
| EMC | According to EN 61000-6-2 and EN 61000-6-3 1) |
| Enclosure rating | IP65, with mating connector inserted (according to IEC 60529) |
- 1) The EMC according to the standards quoted is achieved when the motor feedback system is mounted in an electrically conductive housing, which is connected to the central earthing point of the motor controller via a cable screen. The GND-(0 V) connection of the supply voltage is also grounded here. If other shielding concepts are used, users must perform their own tests.
Classifications
| ECl@ss 5.0 | 27270590 |
| ECl@ss 5.1.4 | 27270590 |
| ECl@ss 6.0 | 27270590 |
| ECl@ss 6.2 | 27270590 |
| ECl@ss 7.0 | 27270590 |
| ECl@ss 8.0 | 27270590 |
| ECl@ss 8.1 | 27270590 |
| ECl@ss 9.0 | 27270590 |
| ETIM 5.0 | EC001486 |
| ETIM 6.0 | EC001486 |
| UNSPSC 16.0901 | 41112113 |
