MPS-096TSNP0

6,710,000

Tên sản phẩm: Position sensors MPS-T

Danh mục: Magnetic cylinder sensors

Model: MPS-096TSNP0

ID: 1053837

Nhà sản xuất: SICK

Xuất xứ: HU

Hàng mới 100%, bảo hành 12 tháng theo quy định nhà sản xuất

Cung cấp chứng nhận xuất xứ (CO), chứng nhận chất lượng (CQ) theo yêu cầu khách hàng

Mã: 1053837 Danh mục:

Mô tả sản phẩm

Magnetic cylinder sensors

Features
Cylinder type T-slot
Cylinder types with adapter

Round body cylinder

Profile cylinders and tie-rod cylinders

Dovetail groove cylinder

SMC rail CDQ2

SMC rail ECDQ2

SMC cylinders with C-slot

Measuring range 96 mm 1)
Housing length 109 mm
Output function Analog
Electrical wiring DC 4-wire
Analog output (voltage) 0 V … 10 V 2)
Analog output (current) 4 mA … 20 mA 2)
Enclosure rating IP67 3)
Cable outlet Axial
Adjustment
Teach-in control panel or ET Teaching in analog outputs
Resetting the measuring range to factory settings
    1) , ? 1 mm.2) The sensor only activates the wired output.3) According to EN 60529.
Mechanics/electronics
Supply voltage 15 V DC … 30 V DC
Power consumption 22 mA 1)
Max. load resistance 500 ? Power Output, at 24 V
Min. load resistance ? 2 k? 2)
Protection class III
Time delay before availability 1.5 s
Required magnetic field sensitivity, typ. 3 mT
Resolution, typ. 0.03 % FSR (max. ? 0.05 mm) 3)
Linearity error, typ. 0.3 mm 4)
Repeat accuracy, typ. 0.06 % FSR (? 0.1 mm) 5)
Sampling rate, typ. 1 ms 6)
Status indicator LED ?
Reverse polarity protection ?
Short-circuit protection ?
Ambient operating temperature ?20 ?C … +70 ?C
Shock and vibration resistance 30 g, 11 ms / 10 … 55 Hz, 1 mm
EMC According to EN 60947-5-2 7)
Housing material Plastic
Connection type Cable with M8 male connector, 4-pin, 0.3 m 8)
Cable material PUR
Conductor cross-section 0.08 mm?
UL File No. NRKH.E181493 & NRKH7.E181493
    1) Without load.2) Voltage output.3) FSR: Full Scale Range, max. measuring range.4) At 25 ? C, linearity error (maximum deviation) depending on response curve and minimal deviation function.5) At 25 ? C, repeatability magnet movement in one direction.6) Only in standard mode, not in IO-Link mode.7) The analog measured value can deviate under transient conditions.8) Do not bend below 0 ?C.
Classifications
ECl@ss 5.0 27270104
ECl@ss 5.1.4 27270104
ECl@ss 6.0 27270104
ECl@ss 6.2 27270104
ECl@ss 7.0 27270104
ECl@ss 8.0 27270104
ECl@ss 8.1 27270104
ECl@ss 9.0 27270104
ETIM 5.0 EC002544
ETIM 6.0 EC002544
UNSPSC 16.0901 39122230