Mô tả sản phẩm
Photoelectric sensors
Features
| Sensor/ detection principle | Photoelectric retro-reflective sensor, Reflex Array |
| Dimensions (W x H x D) | 24.6 mm x 80 mm x 54.2 mm |
| Housing design (light emission) | Rectangular |
| Minimum object size | 8 mm, position-independent detection within the light array |
| Sensing range max. |
0 m … 4.5 m 1) 0 m … 2 m 2) |
| Sensing range |
0 m … 4.5 m 1) 0 m … 2 m 2) |
| Distance of the sensor to reflector |
0.5 m … 4.5 m 1) 0.5 m … 2 m 2) |
| Type of light | Visible red light |
| Light source | PinPoint LED 3) |
| Adjustment | Single teach-in button |
| AutoAdapt | ? |
| Special applications | Detecting transparent objects, Detecting perforated objects, Detecting uneven, shiny objects, Detecting objects with position tolerances |
| Special features | Detection height 30 mm |
- 1) Reflector PL80A.2) Reflector PL40A.3) Average service life: 100,000 h at TU = +25 ?C.
Mechanics/electronics
| Supply voltage | 10 V DC … 30 V DC 1) |
| Ripple | ? 5 Vpp 2) |
| Power consumption | 35 mA 3) |
| Switching output | PNP |
| Output function | Complementary |
| Switching mode | Light/dark switching |
| Signal voltage PNP HIGH/LOW | Approx. VS ? 2.5 V / 0 V |
| Output current Imax. | ? 100 mA |
| Response time | ? 2.5 ms 4) |
| Switching frequency | 200 Hz 5) |
| Connection type | Cable with M12 male connector, 4-pin, 270 mm 6) |
| Cable material | PVC |
| Circuit protection |
A 7) B 8) C 9) |
| Protection class | II 10) |
| Weight | 130 g |
| Housing material | Plastic, ABS |
| Optics material | Plastic, PMMA |
| Enclosure rating | IP67 |
| Special feature | Light band |
| Ambient operating temperature | ?30 ?C … +60 ?C 11) |
| Ambient storage temperature | ?40 ?C … +75 ?C |
| UL File No. | NRKH.E181493 & NRKH7.E181493 |
- 1) Limit values when operated in short-circuit protected network: max. 8 A.2) May not exceed or fall below Uv tolerances.3) Without load.4) Signal transit time with resistive load.5) With light/dark ratio 1:1.6) Do not bend below 0 ?C.7) A = VS connections reverse-polarity protected.8) B = inputs and output reverse-polarity protected.9) C = interference suppression.10) Reference voltage: 50 V DC.11) Avoid condensation on the front screen of the sensor and on the reflector.
Classifications
| ECl@ss 5.0 | 27270902 |
| ECl@ss 5.1.4 | 27270902 |
| ECl@ss 6.0 | 27270902 |
| ECl@ss 6.2 | 27270902 |
| ECl@ss 7.0 | 27270902 |
| ECl@ss 8.0 | 27270902 |
| ECl@ss 8.1 | 27270902 |
| ECl@ss 9.0 | 27270902 |
| ETIM 5.0 | EC002717 |
| ETIM 6.0 | EC002717 |
| UNSPSC 16.0901 | 39121528 |
