HSE18-A4B2BA

4,884,000

Tên sản phẩm: Hybrid photoelectric sensors SureSense

Danh mục: Photoelectric sensors

Model: HSE18-A4B2BA

ID: 1079044

Nhà sản xuất: SICK

Xuất xứ:

Hàng mới 100%, bảo hành 12 tháng theo quy định nhà sản xuất

Cung cấp chứng nhận xuất xứ (CO), chứng nhận chất lượng (CQ) theo yêu cầu khách hàng

Mã: 1079044 Danh mục:

Mô tả sản phẩm

Photoelectric sensors

Features
Sensor/ detection principle Through-beam photoelectric sensor
Dimensions (W x H x D) 16.2 mm x 45.5 mm x 31.8 mm
Housing design (light emission) Hybrid
Thread diameter (housing) M18
Mounting system type M18, nose / side (24 ? 24.5 mm)
Housing color Blue
Sensing range max. 0 m … 25 m
Sensing range 0 m … 20 m
Type of light Visible red light
Light source PinPoint LED 1)
Light spot size (distance) 400 mm x 200 mm (10 m)
Wave length 631 nm
Adjustment
Potentiometer, right None
Potentiometer, left None
Special features Signal strength light bar
    1) Average service life: 100,000 h at TU = +25 ?C.
Mechanics/electronics
Supply voltage 10 V DC … 30 V DC
Ripple < 5 Vpp 1)
Power consumption 20 mA 2)
Switching output

PNP

NPN

Switching output detail
Switching output Q1 PNP, Dark switching
Switching output Q2 NPN, Dark switching
Output current Imax. ? 100 mA
Response time ? 0.5 ms 3)
Switching frequency 1,000 Hz 4)
Connection type Cable with M12 male connector, 4-pin, 150 mm
Cable material PVC
Conductor cross-section 0.2 mm?
Circuit protection

A 5)

B 6)

D 7)

Protection class III 8)
Weight 18 g
Housing material Plastic, VISTAL?
Optics material Plastic, PMMA
Enclosure rating

IP67

IP69K

EMC EN 60947-5-2 (The sensor complies with the Radio Safety Requirements (EMC) for the industrial sector (Radio Safety Class A). It may cause radio interference if used in a residential area.)
Ambient operating temperature ?40 ?C … +70 ?C
Ambient storage temperature ?40 ?C … +75 ?C
UL File No. E189383
    1) May not exceed or fall below Uv tolerances.2) Without signal strength light bar and load.3) Signal transit time with resistive load.4) With light/dark ratio 1:1.5) A = VS connections reverse-polarity protected.6) B = inputs and output reverse-polarity protected.7) D = outputs overcurrent and short-circuit protected.8) Reference voltage: 50 V DC.
Classifications
ECl@ss 5.0 27270904
ECl@ss 5.1.4 27270904
ECl@ss 6.0 27270904
ECl@ss 6.2 27270904
ECl@ss 7.0 27270904
ECl@ss 8.0 27270904
ECl@ss 8.1 27270904
ECl@ss 9.0 27270904
ETIM 5.0 EC002719
ETIM 6.0 EC002719
UNSPSC 16.0901 39121528