Mô tả sản phẩm
Photoelectric sensors
Features
| Sensor/ detection principle | Photoelectric retro-reflective sensor, Dual lens | ||||||
| Dimensions (W x H x D) | 16.2 mm x 45.5 mm x 34.4 mm | ||||||
| Housing design (light emission) | Hybrid | ||||||
| Thread diameter (housing) | M18 | ||||||
| Mounting system type | M18, nose / side (24 ? 24.5 mm) | ||||||
| Housing color | Blue | ||||||
| Sensing range max. | 0.03 m … 6.5 m 1) | ||||||
| Sensing range | 0.03 m … 5 m 1) | ||||||
| Type of light | Visible red light | ||||||
| Light source | PinPoint LED 2) | ||||||
| Light spot size (distance) | 130 mm x 260 mm (6.5 m) | ||||||
| Wave length | 631 nm | ||||||
|
|||||||
| Special features | – | ||||||
- 1) Reflector PL80A.2) Average service life: 100,000 h at TU = +25 ?C.
Mechanics/electronics
| Supply voltage | 21.6 V DC … 250 V DC, 96 V AC … 250 V AC 1) | ||||
| Power consumption | 10 mA 2) | ||||
| Switching output | MOSFET | ||||
|
|||||
| Output current Imax. | ? 100 mA | ||||
| Response time | ? 0.5 ms 3) | ||||
| Switching frequency | 1,000 Hz 4) | ||||
| Connection type | Cable with connector, Micro (1/2″-20), 4-pin, 150 mm | ||||
| Cable material | PVC | ||||
| Conductor cross-section | 0.2 mm? | ||||
| Circuit protection |
A 5) B 6) D 7) |
||||
| Protection class | II 8) | ||||
| Weight | 18 g | ||||
| Polarisation filter | ? | ||||
| Housing material | Plastic, VISTAL? | ||||
| Optics material | Plastic, PMMA | ||||
| Enclosure rating |
IP67 IP69K |
||||
| EMC | EN 60947-5-2 (The sensor complies with the Radio Safety Requirements (EMC) for the industrial sector (Radio Safety Class A). It may cause radio interference if used in a residential area.) | ||||
| Ambient operating temperature | ?40 ?C … +70 ?C | ||||
| Ambient storage temperature | ?40 ?C … +75 ?C | ||||
| UL File No. | E189383 | ||||
- 1) Above Ta = 60 ?C, max. supply voltage = 120 V.2) Without load. The output load and sensor must use the same power source.3) Signal transit time with resistive load.4) With light/dark ratio 1:1.5) A = VS connections reverse-polarity protected.6) B = inputs and output reverse-polarity protected.7) D = outputs overcurrent and short-circuit protected.8) Reference voltage: 250 V AC, overvoltage category 2.
Classifications
| ECl@ss 5.0 | 27270904 |
| ECl@ss 5.1.4 | 27270904 |
| ECl@ss 6.0 | 27270904 |
| ECl@ss 6.2 | 27270904 |
| ECl@ss 7.0 | 27270904 |
| ECl@ss 8.0 | 27270904 |
| ECl@ss 8.1 | 27270904 |
| ECl@ss 9.0 | 27270904 |
| ETIM 5.0 | EC002719 |
| ETIM 6.0 | EC002719 |
| UNSPSC 16.0901 | 39121528 |
