Mô tả sản phẩm
Encoders
Features
| Special device | ? |
| Specialty | Pulses per revolution programmable up to 65536, preprogrammed to 1000 by factory, preprogrammed to 1000 by factory |
| Standard reference device | DFV60A-22PC65536, 1051309 |
Performance
| ? 0,4 mm/m, subject to the measuring wheel (wheel + surface) | |
| ? 0,4 mm/m, subject to the measuring wheel (wheel + surface) | |
| Initialization time | 30 ms |
Electrical data
| Electrical interface | 4.5 V … 32 V, TTL or HTL programmable, as factory setting customized preprogrammed to TTL |
| Connection type | Male connector M12, 8-pin, radial |
| Load current | ? 30 mA |
| Maximum output frequency | ? 820 kHz |
| Reference signal, number | 1 |
| Reference signal, position | 90?, electric, logically gated with A and B |
| MTTFd: mean time to dangerous failure | 300 years (EN ISO 13849-1) 1) |
- 1) This product is a standard product and does not constitute a safety component as defined in the Machinery Directive. Calculation based on nominal load of components, average ambient temperature 40?C, frequency of use 8760 h/a. All electronic failures are considered hazardous. For more information, see document no. 8015532.
Mechanical data
| Measuring wheel circumference | 300 mm | ||||||||||
| Measuring wheel surface | O-ring NBR70 1) | ||||||||||
| Mass | 500 g | ||||||||||
|
|||||||||||
|
|||||||||||
| Start up torque | 0.8 Ncm (at 20 ?C) | ||||||||||
| Operating torque | 0.6 Ncm (at 20 ?C) | ||||||||||
| Operating speed | 1,500 min?? | ||||||||||
| Maximum operating speed | 3,000 min?? 2) | ||||||||||
| Bearing lifetime | 3 x 10^9 revolutions | ||||||||||
| Maximum travel/deflection of spring arm | 40 mm | ||||||||||
| Max. permissible working area for the spring (continuous operation) | ? 10 mm | ||||||||||
| Recommended spring deflection | 20 mm … 40 mm | ||||||||||
| Mounting position relative to the measuring object | Preferably from above, from below possible | ||||||||||
- 1) The surface of a measuring wheel is subject to wear. This depends on contact pressure, acceleration behavior in the application, traversing speed, measurement surface, mechanical alignment of the measuring wheel, temperature, and ambient conditions. We recommend you regularly check the condition of the measuring wheel and replace as required.2) Self-warming 3.3 K per 1,000 rpm, when applying, note operating temperature range.
Ambient data
| EMC | According to EN 61000-6-2 and EN 61000-6-4 |
| Enclosure rating | IP65 |
| Permissible relative humidity | 90 % (condensation of the optical scanning not permitted) |
| Working temperature range | ?20 ?C … +100 ?C |
| Storage temperature range | ?40 ?C … +100 ?C, without package |
Classifications
| ECl@ss 5.0 | 27270501 |
| ECl@ss 5.1.4 | 27270501 |
| ECl@ss 6.0 | 27270590 |
| ECl@ss 6.2 | 27270590 |
| ECl@ss 7.0 | 27270501 |
| ECl@ss 8.0 | 27270501 |
| ECl@ss 8.1 | 27270501 |
| ECl@ss 9.0 | 27270501 |
| ETIM 5.0 | EC001486 |
| ETIM 6.0 | EC001486 |
| UNSPSC 16.0901 | 41112113 |
