Mô tả sản phẩm
Photoelectric sensors
Features
| Sensor/ detection principle | Photoelectric proximity sensor, Energetic | ||||||
| Dimensions (W x H x D) | 16.2 mm x 45.5 mm x 31.8 mm | ||||||
| Housing design (light emission) | Hybrid | ||||||
| Thread diameter (housing) | M18 | ||||||
| Mounting system type | M18, nose / side (24 ? 24.5 mm) | ||||||
| Housing color | Blue | ||||||
| Sensing range max. | 5 mm … 1,000 mm 1) | ||||||
| Sensing range | 10 mm … 250 mm 2) | ||||||
| Type of light | Infrared light | ||||||
| Light source | LED 3) | ||||||
| Light spot size (distance) | 110 mm (800 mm) | ||||||
| Wave length | 850 nm | ||||||
|
|||||||
| Special features | Signal strength light bar | ||||||
- 1) Object with 90 % reflectance (referred to standard white, DIN 5033).2) Object with 6 % reflectance (referred to standard black, DIN 5033).3) Average service life: 100,000 h at TU = +25 ?C.
Mechanics/electronics
| Supply voltage | 10 V DC … 30 V DC | ||||||
| Ripple | < 5 Vpp 1) | ||||||
| Power consumption | 20 mA 2) | ||||||
| Switching output | PNP | ||||||
| Output function | Complementary | ||||||
|
|||||||
| Output current Imax. | ? 100 mA | ||||||
| Response time | ? 0.5 ms 3) | ||||||
| Switching frequency | 1,000 Hz 4) | ||||||
| Connection type | Cable with M12 male connector, 4-pin, 150 mm | ||||||
| Cable material | PVC | ||||||
| Conductor cross-section | 0.2 mm? | ||||||
| Circuit protection |
A 5) B 6) D 7) |
||||||
| Protection class | III 8) | ||||||
| Weight | 18 g | ||||||
| Housing material | Plastic, VISTAL? | ||||||
| Optics material | Plastic, PMMA | ||||||
| Enclosure rating |
IP67 IP69K |
||||||
| EMC | EN 60947-5-2 (The sensor complies with the Radio Safety Requirements (EMC) for the industrial sector (Radio Safety Class A). It may cause radio interference if used in a residential area.) | ||||||
| Ambient operating temperature | ?40 ?C … +70 ?C | ||||||
| Ambient storage temperature | ?40 ?C … +75 ?C | ||||||
| UL File No. | E189383 | ||||||
- 1) May not exceed or fall below Uv tolerances.2) Without signal strength light bar and load.3) Signal transit time with resistive load.4) With light/dark ratio 1:1.5) A = VS connections reverse-polarity protected.6) B = inputs and output reverse-polarity protected.7) D = outputs overcurrent and short-circuit protected.8) Reference voltage: 50 V DC.
Classifications
| ECl@ss 5.0 | 27270904 |
| ECl@ss 5.1.4 | 27270904 |
| ECl@ss 6.0 | 27270904 |
| ECl@ss 6.2 | 27270904 |
| ECl@ss 7.0 | 27270904 |
| ECl@ss 8.0 | 27270904 |
| ECl@ss 8.1 | 27270904 |
| ECl@ss 9.0 | 27270904 |
| ETIM 5.0 | EC002719 |
| ETIM 6.0 | EC002719 |
| UNSPSC 16.0901 | 39121528 |
