Mô tả sản phẩm
Photoelectric sensors
Features
| Sensor/ detection principle | Photoelectric proximity sensor, Background suppression |
| Dimensions (W x H x D) | 7.7 mm x 27.5 mm x 13.5 mm |
| Housing design (light emission) | Rectangular |
| Sensing range max. | 50 mm … 800 mm 1) |
| Sensing range | 50 mm … 800 mm 1) |
| Distance value-repeatability | 2 mm … 5 mm 2) |
| Distance value-accuracy | ? 20 mm |
| Type of light | Infrared light |
| Light source | Laser 3) |
| Light spot size (distance) | ? 10 mm (300 mm) |
| Wave length | 940 nm |
| Laser class | I |
| Adjustment | Single teach-in button, IO-Link 4) |
| Pin 2 configuration | External input, Teach-in input, Sender off input, Detection output, logic output |
| Special applications | Detecting small objects |
- 1) Object with 6 … 90 % remission (based on standard white to DIN 5033).2) Equivalent to 1 ?.3) Average service life: 50,000 h at TU = +25 ?C.4) Teach-Offset 15 mm.
Mechanics/electronics
| Supply voltage | 10 V DC … 30 V DC 1) |
| Ripple | ? 5 Vpp 2) |
| Power consumption | 20 mA 3) |
| Switching output | PNP |
| Switching mode | Light/dark switching |
| Output current Imax. | < 50 mA |
| Response time | Typ. 95 ms 4) |
| Switching frequency | 5 Hz 5) |
| Analog output | – |
| Input | MFin = multifunctional input programmable |
| Connection type | Cable with M8 male connector, 4-pin, 200 mm 6) |
| Cable material | PVC |
| Cable diameter | ? 3 mm |
| Circuit protection |
A 7) B 8) D 9) |
| Protection class | III |
| Housing material | Plastic, MABS, ABS |
| Optics material | Plastic, PMMA |
| Enclosure rating | IP67 |
| Ambient operating temperature | ?25 ?C … +50 ?C |
| Ambient storage temperature | ?40 ?C … +75 ?C |
| UL File No. | E181493 |
- 1) Limit values. Operated in short-circuit protected network: max. 8 A.2) May not exceed or fall below Uv tolerances.3) Without load.4) Jitter +- 20 ms.5) With light/dark ratio 1:1.6) Do not bend below 0 ?C.7) A = VS connections reverse-polarity protected.8) B = output reverse-polarity protected.9) D = outputs overcurrent and short-circuit protected.
Classifications
| ECl@ss 5.0 | 27270904 |
| ECl@ss 5.1.4 | 27270904 |
| ECl@ss 6.0 | 27270904 |
| ECl@ss 6.2 | 27270904 |
| ECl@ss 7.0 | 27270904 |
| ECl@ss 8.0 | 27270904 |
| ECl@ss 8.1 | 27270904 |
| ECl@ss 9.0 | 27270904 |
| ETIM 5.0 | EC002719 |
| ETIM 6.0 | EC002719 |
| UNSPSC 16.0901 | 39121528 |
Smart Task
| Smart Task name | Base logics |
| Logic function |
Direct AND OR WINDOW Hysteresis |
| Timer function |
Deactivated On delay Off delay ON and OFF delay Impulse (one shot) |
| Inverter | Yes |
| Switching frequency |
SIO Direct: 5 Hz 1) SIO Logic: 5 Hz 2) IOL: 5 Hz 3) |
| Response time |
SIO Direct: typ. 90 ms 1) SIO Logic: typ. 90 ms 2) IOL: typ. 95 ms 3) |
- 1) SIO Direct: sensor operation in standard I/O mode without IO-Link communication and without using internal sensor logic or time parameters (set to “direct”/”deactivated”).2) SIO Logic: Sensor operation in standard I/O mode without IO-Link communication. Sensor-internal logic or timing parameters plus Automation Functions used.3) IOL: Sensor operation with full IO-Link communication and usage of logic, timing and Automation Function parameters.
Communication interface
| Communication interface | IO-Link V1.1 |
| Communication Interface detail | COM2 (38,4 kBaud) |
| Cycle time | 5 ms |
| Process data length | 4 Byte |
| Process data structure |
Bit 0 = switching signal QL1 Bit 1 = switching signal QL2 Bit 2 = switching signal QInt1 Bit 3 = switching signal QInt2 Bit 4 … 15 = empty |
| Process data structure A | Bit 16 … 31 = distance value |
