Mô tả sản phẩm
Encoders
MTTFd: mean time to dangerous failure | 69 years (EN ISO 13849-1) 1) 2) |
- 1) This product is a standard product and does not constitute a safety component as defined in the Machinery Directive. Calculation based on nominal load of components, average ambient temperature of electronic 60?C, frequency of use 8760 h/a.2) Every second failure of an electronic component is regarded as a dangerous failure.
Measured values | Positioning | ||||||
Measuring range | 50 mm … 1,000 mm | ||||||
|
|||||||
Switch-on time | < 250 ms | ||||||
Measuring frequency (internal) | 2 ms | ||||||
Setting point (zero and end point of the piston stroke) | ? 1 mm | ||||||
Resolution | Typ. 0,1 mm (rauschfrei) | ||||||
Hysteresis | ? 0,1 mm | ||||||
Linearity |
? 0.04% F.S. (measuring range from 500 to 2,500 mm) ? 0.25 mm (measuring range 50 to 500 mm) |
||||||
Temperature drift (warm-up phase) | ? ? 0.25 mm | ||||||
MTTFd | 69 years (EN ISO 13849-1) 1) 2) |
- 1) This product is a standard product and does not constitute a safety component as defined in the Machinery Directive. Calculation based on nominal load of components, average ambient temperature of electronic 60?C, frequency of use 8760 h/a.2) Every second failure of an electronic component is regarded as a dangerous failure.
Communication interface | Analog |
Power consumption | ? 0.5 W |
Connection type | Cable, 3-wire, 300 mm |
Read head material | Stainless steel 1.4305, AISI 303 |
EMC |
EU Directive 2014/30/EU CE marking EU Directive 2009/64/EU Agricultural machinery |
Generic standards | According to EN 61000-6-2 and EN 61000-6-3 |
Agricultural and forestry machinery Construction machinery |
ISO 14982 EN13307/ ISO 13766 |
Transient pulses | ISO 7637-2 |
ESD (air and contact discharge) | EN 61000-4-2, ISO/TR 10605 1) |
Enclosure rating | IP67 (EN 60 529) |
Operating temperature range | ?40 ?C … +105 ?C |
Ambient temperature (fluid) | ?30 ?C … +95 ?C |
Permissible relative humidity | 90 % (Condensation not permitted) |
Storage temperature range | ?20 ?C … +85 ?C |
Resistance to shocks |
Fall test in acc. with IEC60068-2-31 100 g, 11 ms (Single shock in acc. with IEC60068-2-27) 50 g, 11 ms (Continuous shocks, 1,000 shocks per spatial axis in acc. with IEC 60068-2-27) |
Resistance to vibration |
20 g, 24 /h (IEC 60068-2-6) 18 g, 36 /h (IEC 60068-2-80) 20 g, 48 /h (IEC 60068-2-64) |
Nominal operating pressure (PN) | 400 bar |
Max. overload pressure during operation (PN x 1.5) | 480 bar |
Max. test pressure in cylinder (PN x 1.5) | 600 bar |
- 1) For details of applied tests and descriptive standards, please see document 8021472.
ECl@ss 5.0 | 27270705 |
ECl@ss 5.1.4 | 27270705 |
ECl@ss 6.0 | 27270705 |
ECl@ss 6.2 | 27270705 |
ECl@ss 7.0 | 27270705 |
ECl@ss 8.0 | 27270705 |
ECl@ss 8.1 | 27270705 |
ECl@ss 9.0 | 27270705 |
ETIM 5.0 | EC002544 |
ETIM 6.0 | EC002544 |
UNSPSC 16.0901 | 41111613 |