WT18X-3P920S14

10,215,000

Tên sản phẩm: Small photoelectric sensors W18-3 Ex

Danh mục: Product portfolio

Model: WT18X-3P920S14

ID: 1029584

Nhà sản xuất: SICK

Xuất xứ: DE

Hàng mới 100%, bảo hành 12 tháng theo quy định nhà sản xuất

Cung cấp chứng nhận xuất xứ (CO), chứng nhận chất lượng (CQ) theo yêu cầu khách hàng

Mã: 1029584 Danh mục:

Mô tả sản phẩm

Product portfolio

Features
Sensor/ detection principle Photoelectric proximity sensor, Background suppression
Dimensions (W x H x D) 23.6 mm x 117 mm x 49.3 mm
Housing design (light emission) Rectangular
Sensing range max. 10 mm … 1,000 mm 1)
Sensing range 50 mm … 1,000 mm 1)
Type of light Infrared light
Light source LED 2)
Light spot size (distance) ? 30 mm (600 mm)
Wave length 870 nm
Adjustment Potentiometer, 4 turns
Special applications Explosive areas
    1) Object with 90 % reflectance (referred to standard white, DIN 5033).2) Average service life: 100,000 h at TU = +25 ?C.
Mechanics/electronics
Supply voltage 10 V DC … 30 V DC 1)
Ripple < 5 Vpp 2)
Power consumption 55 mA 3)
Switching output PNP
Switching mode Light/dark switching
Output current Imax. 100 mA
Response time < 700 ?s 4)
Switching frequency ? 700 Hz 5)
Connection type Cable with M12 male connector, 4-pin, 0.29 m 6)
Cable material PVC
Circuit protection

A 7)

C 8)

D 9)

Weight 70 g
Special device ?
Housing material Plastic, ABS
Optics material Plastic, PMMA
Enclosure rating IP67
ATEX marking EX II 3G EX nA op is IIB T4 Gc X
EX II 3D EX tc IIIB T135?C Dc IP67 X
According to directive 2014/34/EX/EU 10)
Ex area category 3D, 3G
Ambient operating temperature ?20 ?C … +50 ?C
Ambient storage temperature ?40 ?C … +75 ?C
    1) Limit values when operated in short-circuit protected network: max. 8 A.2) May not exceed or fall below Uv tolerances.3) Without load.4) Signal transit time with resistive load.5) With light/dark ratio 1:1.6) Do not bend below 0 ?C.7) A = VS connections reverse-polarity protected.8) C = interference suppression.9) D = outputs overcurrent and short-circuit protected.10) To validate this protection class, the completeness of the protective housing has to be verified prior to commissioning and, if necessary, the protective housing has to be attached and installed by the operator.
Classifications
ECl@ss 5.0 27270904
ECl@ss 5.1.4 27270904
ECl@ss 6.0 27270904
ECl@ss 6.2 27270904
ECl@ss 7.0 27270904
ECl@ss 8.0 27270904
ECl@ss 8.1 27270904
ECl@ss 9.0 27270904
ETIM 5.0 EC002719
ETIM 6.0 EC002719
UNSPSC 16.0901 39121528