Mô tả sản phẩm
| Electrical data |
| Operating voltage [V] |
18…31.6 DC |
| Max. current consumption from AS-i [mA] |
180; (without sensors: < 30 mA; inputs and outputs active: < 180 mA) |
| Protection class |
III |
| Max. current load total [A] |
0.15; (total current for all outputs and sensor supply supplied from AS-i: 150 mA) |
| Integrated watchdog |
yes |
| Inputs / outputs |
| Number of inputs and outputs |
Number of digital inputs: 4; Number of digital outputs: 3 |
| Inputs |
| Number of digital inputs |
4 |
| Input circuit of digital inputs |
PNP |
| Sensor supply of the inputs |
AS-i |
| Voltage supply [V] |
18…30 |
| Max. total current rating of inputs [mA] |
150 |
| Input current High [mA] |
6…10 |
| Input current Low [mA] |
0…2 |
| Min. switching level high signal [V] |
11 |
| Digital inputs protected against short circuits |
yes |
| Outputs |
| Number of digital outputs |
3 |
| Circuit |
PNP |
| Voltage range DC [V] |
AS-i |
| Max. current load per output [mA] |
100; (utilisation category DC-13 (control of electromagnets): 2,5 W (IEC 60947-5-1)) |
| Short-circuit proof |
yes |
| Electrically separated |
yes |
| Operating conditions |
| Ambient temperature [?C] |
-25…55 |
| Protection |
IP 20 |
| Tests / approvals |
| EMC |
|
| AS-i classification |
| AS-i version |
3.0 |
| Extended addressing mode possible |
yes |
| AS-i profile |
S-7.A.E |
| AS-i I/O configuration [hex] |
7 |
| AS-i ID code [hex] |
A.E |
| AS-i certificate |
102401 |
| Mechanical data |
| Weight [g] |
68 |
| Type of mounting |
installation in a surface-mounted housing |
| Dimensions [mm] |
31.1 x 12 x 76.6 |
| Materials |
housing: PC potted |
| Displays / operating elements |
| Display |
| operation |
LED, green |
| errors |
LED, red |
| function |
LED, yellow |
|
| Remarks |
| Remarks |
| A watchdog function switches the outputs off if there is no communication on the AS-i line. |
| Install the unit so that exposed parts cannot be touched. |
| Installation in a surface-mounted housing with the dimensions of 68 x 136 x 53 mm (LxWxH), e.g. Schneider Electric Harmony, XALD03, XALD04 |
| Do not connect any of the following points to an external potential: |
| 0-, I+, I1, I2, I3, I4 |
| The connections are electrically connected with the AS-i cable. |
| can be used up to a height of 2000 metres above sea level |
|
| Pack quantity |
1 pcs. |
| Electrical connection |
|
screw terminals: |
