ARS60-J4M00400

18,911,000

Tên sản phẩm: Absolute encoders ARS60 SSI/Parallel

Danh mục: Product portfolio

Model: ARS60-J4M00400

ID: 1031732

Nhà sản xuất: SICK

Xuất xứ: DE

Hàng mới 100%, bảo hành 12 tháng theo quy định nhà sản xuất

Cung cấp chứng nhận xuất xứ (CO), chứng nhận chất lượng (CQ) theo yêu cầu khách hàng

Mã: 1031732 Danh mục:

Mô tả sản phẩm

Product portfolio

Performance
Number of steps per revolution 400 (any number of steps from 00002 to 07999 possible. Always 5 characters in cleartext.)
Number of revolutions 1
Resolution 400 (1)
Error limits G 0.035?, 0.046? (binary number of steps, non-binary number of steps) 1)
Repeatability standard deviation ?r 0.005? 2)
    1) In accordance with DIN ISO 1319-1, position of the upper and lower error limit depends on the installation situation, specified value refers to a symmetrical position, i.e. deviation in upper and lower direction is the same.2) In accordance with DIN ISO 55350-13, 68.3% of the measured values are inside the specified area.
Interfaces
Communication interface Parallel data world
Initialization time 80 ms 1)
SSI
Code sequence parameter adjustable CW (clockwise), Increasing, when turning the shaft For clockwise rotation, looking in direction ?A? (see dimensional drawing) increasing when viewing the clockwise rotating shaft
    1) Valid positional data can be read once this time has elapsed.
Electrical data
Connection type Cable, 22-wire, radial, 5 m
Supply voltage range 10 V DC … 32 V DC
Reverse polarity protection ?
Short-circuit protection ?
MTTFd: mean time to dangerous failure 300 years (EN ISO 13849-1) 1)
    1) This product is a standard product and does not constitute a safety component as defined in the Machinery Directive. Calculation based on nominal load of components, average ambient temperature 40?C, frequency of use 8760 h/a. All electronic failures are considered hazardous. For more information, see document no. 8015532.
Mechanical data
Mechanical design Solid shaft, face mount flange
Shaft diameter 10 mm x 18 mm
Shaft length 18 mm
Start up torque 0.4 Ncm
Operating torque 0.3 Ncm
Permissible Load capacity of shaft

20 N / radial

10 N / axial

Moment of inertia of the rotor 54 gcm?
Bearing lifetime 3.6 x 10^9 revolutions
Angular acceleration ? 500,000 rad/s?
Ambient data
EMC According to EN 61000-6-2 and EN 61000-6-3 1)
Enclosure rating IP66 (according to IEC 60529)
Permissible relative humidity 90 % (condensation of the optical scanning not permitted)
Operating temperature range ?20 ?C … +85 ?C
Storage temperature range ?40 ?C … +100 ?C
Resistance to shocks 50 g, 11 ms (according to EN 60068-2-27)
Resistance to vibration 20 g, 10 Hz … 2,000 Hz (according to EN 60068-2-6)
    1) EMC according to the standards quoted is achieved if shielded cables are used.
Classifications
ECl@ss 5.0 27270502
ECl@ss 5.1.4 27270502
ECl@ss 6.0 27270590
ECl@ss 6.2 27270590
ECl@ss 7.0 27270502
ECl@ss 8.0 27270502
ECl@ss 8.1 27270502
ECl@ss 9.0 27270502
ETIM 5.0 EC001486
ETIM 6.0 EC001486
UNSPSC 16.0901 41112113