Mô tả sản phẩm

Electrical data Operating voltage [V] 26.5…31.6 DC Max. current consumption from AS-i [mA] 280 Integrated watchdog yes Inputs / outputs Number of inputs and outputs Number of digital inputs: 4; Number of pneumatic outputs: 2 Inputs Number of digital inputs 4 Input circuit of digital inputs PNP Sensor supply of the inputs AS-i Voltage supply [V] 20…30; (via flat cable) Max. total current rating of inputs [mA] 200 Input current High [mA] 6…10 Input current Low [mA] 0…2 Min. switching level high signal [V] 11 Digital inputs protected against short circuits yes Outputs Electrical design AS-i Number of pneumatic outputs 2 Operating conditions Ambient temperature [?C] -10…50 Protection IP 50 Tests / approvals ATEX marking II 3D Ex tc IIIB T80?C Dc X IP50 EMC

EN 50295
IEC 61000-6-2

MTTF [years] 258 AS-i classification AS-i version 2.11 + 3.0 AS-i addressing addressing socket Extended addressing mode possible yes AS-i profile S-7.A.E AS-i I/O configuration [hex] 7 AS-i ID code [hex] A.E AS-i certificate pending yes Assignment of the data bits

data bit	D0	D1	D2	D3
input	1	2	3	4
socket	I-1/2	I-1/2 I-2	I-3/4	I-3/4 I-4
pin	4	2 4	4	2 4
pneumatic output	2	4	–	–

Mechanical data Weight [g] 421 Type of mounting AS-i flat cables directly connectable Materials PA; POM; piercing contacts: CuSn6 nickel-plated and tin-plated Pneumatic system 1 x 5/3-way slide valves (free from overlapping); middle position blocked Operating pressure range [bar] 3…8 Operating pressure range [MPa] 0.3…0.8 Air flow at 6/5 bar [l/min] 400 Permissible compressed air non-lubricated compressed air class 6-3-1; lubricated compressed air class 6-3-4 Manual override pressing/releasing or pressing/turning/locking Tube fittings 8 mm Exhaust exhaust can be discharged through tube connection Displays / operating elements Display

operation	LED, green
errors	LED, red
function	LED, yellow

Accessories Accessories (supplied)

lower part

Accessories (optional)

Mounting plate, E74999

Module lower part, E75000

Protective cap: M12, E73004

sealing plugs, E75231

Impact protection housing, E7000A

silencer, E75232

Push-in L-fitting, E75228

Push-in T-fitting, E75227

Remarks Remarks

Mechanical protection has to be implemented.

Otherwise the unit must be installed together with the impact protection housing (E7000A).

If not pneumatically operated, E75231 sealing plug must be inserted.

Avoid ingress of dirt and dust.

Do not connect any of the following points to an external potential:

L-, L+, I-1, I-2, I-3, I-4

The connections are electrically connected with the AS-i cable.

Notes on compressed air and EMC/ESD at www.ifm.com

Pack quantity 1 pcs. Electrical connection Connection quick mounting technology for AS-i flat cable: ; three orientations possible Connection Connector: M12 Diagrams and graphs Pneumatic symbol

	1 x 5/3-way slide valves (free from overlapping); middle position blocked