Mô tả sản phẩm
Motor feedback systems
Performance
Performance
| Number of lines per revolution | 4,096 1) |
| Measuring step | 90? /number of lines |
| Commutation signals | 3 pole pairs (See diagram, different commutation on request) |
| Reference signal, number | 1 |
| Reference signal, position | 90? electric, logically gated with A and B |
| Operating speed | ? 6,000 min?? |
- 1) Number of lines from 1 ? 1,000 and > 4,096 ? 65,536 on request.
Interfaces
Interfaces
| Communication interface | Incremental |
| Communication Interface detail | TTL |
Electrical data
Electrical data
| Connection type | Stranded cable, 15-pin, radial |
| Supply voltage range | 4.5 V DC … 5.5 V DC |
| Output current | 60 mA 1) |
| Maximum output frequency | ? 820 kHz |
- 1) Without load.
Mechanical data
Mechanical data
| Shaft version | Tapered shaft |
| Flange type / stator coupling | Rubber support |
| Dimensions | See dimensional drawing |
| Weight | 0.1 kg |
| Moment of inertia of the rotor | 10 gcm? |
| Operating speed | 12,000 min?? |
| Angular acceleration | ? 200,000 rad/s? |
| Start up torque | 0.4 Ncm |
| Permissible movement of the drive element, static |
Radial ? 0.75 mm axial |
| Permissible movement of the drive element, dynamic |
? 0.1 mm radial ? 0.2 mm axial |
| Angular motion perpendicular to the rotational axis, static | ? 0.005 mm/mm |
| Angular motion perpendicular to the rotational axis, dynamic | ? 0.0025 mm/mm |
| Life of ball bearings | 3.6 x 10^9 revolutions |
Ambient data
Ambient data
| Operating temperature range | ?20 ?C … +115 ?C |
| Storage temperature range | ?40 ?C … +125 ?C, without package |
| Relative humidity/condensation | 90 %, Condensation not permitted |
| Resistance to shocks | 100 g, 10 ms (according to EN 60068-2-27) |
| Frequency range of resistance to vibrations | 20 g, 10 Hz … 2,000 Hz (according to EN 60068-2-6) |
| EMC | According to EN 61000-6-2 and EN 61000-6-3 1) |
| Enclosure rating | IP40 (according to IEC 60529) |
- 1) The EMC according to the standards quoted is achieved when the motor feedback system is mounted in an electrically conductive housing, which is connected to the central earthing point of the motor controller via a cable screen. The GND-(0 V) connection of the supply voltage is also grounded here. If other shielding concepts are used, users must perform their own tests.
Classifications
Classifications
| ECl@ss 5.0 | 27270501 |
| ECl@ss 5.1.4 | 27270501 |
| ECl@ss 6.0 | 27270590 |
| ECl@ss 6.2 | 27270590 |
| ECl@ss 7.0 | 27270501 |
| ECl@ss 8.0 | 27270501 |
| ECl@ss 8.1 | 27270501 |
| ECl@ss 9.0 | 27270501 |
| ETIM 5.0 | EC001486 |
| ETIM 6.0 | EC001486 |
| UNSPSC 16.0901 | 41112113 |
