Mô tả sản phẩm
Product portfolio
Performance
| Pulses per revolution | 65,536 |
| Measuring step | 90? electronically/ppr |
| Measuring step deviation at binary number of lines | ? 0.0015? |
| Error limits | ? 0.03? |
| Initialization time |
32 ms 1) 30 ms |
- 1) With mechanical zero pulse width.
Electrical data
| Electrical interface | 4.5 V … 32 V, TTL/HTL programmable, Factory setting: output level TTL |
| Connection type | Cable, 8-wire, universal, 1.5 m |
| Operating current | 40 mA |
| Power consumption | ? 0.7 W (without load) |
| Load current | ? 30 mA |
| Output frequency | ? 820 kHz |
| Reference signal, number | 1 |
| Reference signal, position | 90?, electric, logically gated with A and B |
| Reverse polarity protection | ? |
| Short-circuit protection of the outputs | ? 1) 2) |
| MTTFd: mean time to dangerous failure | 300 years (EN ISO 13849-1) 3) |
- 1) Programming TTL with ? 5,5 V: short-circuit opposite to another channel or GND permissable for maximum 30 s.2) Programming HTL or TTL with < 5,5 V: short-circuit opposite to another channel, US or GND permissable for maximum 30 s.3) This product is a standard product and does not constitute a safety component as defined in the Machinery Directive. Calculation based on nominal load of components, average ambient temperature 40?C, frequency of use 8760 h/a. All electronic failures are considered hazardous. For more information, see document no. 8015532.
Mechanical data
| Mechanical design | Blind hollow shaft |
| Shaft diameter | 3/8″ |
| Weight | 0.2 kg |
| Shaft material | Metal |
| Flange material | Aluminum |
| Housing material | Aluminum die cast |
| Start up torque | 0.8 Ncm (+20 ?C) |
| Operating torque | 0.6 Ncm (+20 ?C) |
| Permissible shaft movement, axial static/dynamic | ? 0.5 mm / ? 0.01 mm |
| Permissible shaft movement, radial static/dynamic | ? 0.3 mm / ? 0.05 mm |
| Operating speed | ? 6,000 min?? 1) |
| Moment of inertia of the rotor | 40 gcm? |
| Bearing lifetime | 3.6 x 10^10 revolutions |
| Angular acceleration | ? 500,000 rad/s? |
- 1) Take into account self-heating of 3.3 K per 1,000 rpm when designing the operating temperature range.
Ambient data
| EMC | According to EN 61000-6-2 and EN 61000-6-3 |
| Enclosure rating |
IP67, housing side, cable connection (according to IEC 60529) IP65, shaft side (according to IEC 60529) |
| Permissible relative humidity | 90 % (condensation of the optical scanning not permitted) |
| Operating temperature range |
?40 ?C … +100 ?C 1) ?30 ?C … +100 ?C 2) |
| Storage temperature range | ?40 ?C … +100 ?C, without package |
| Resistance to shocks | 100 g, 6 ms (according to EN 60068-2-27) |
| Resistance to vibration | 30 g, 10 Hz … 2,000 Hz (according to EN 60068-2-6) |
- 1) Stationary position of the cable.2) Flexible position of the cable.
Classifications
| ECl@ss 5.0 | 27270501 |
| ECl@ss 5.1.4 | 27270501 |
| ECl@ss 6.0 | 27270590 |
| ECl@ss 6.2 | 27270590 |
| ECl@ss 7.0 | 27270501 |
| ECl@ss 8.0 | 27270501 |
| ECl@ss 8.1 | 27270501 |
| ECl@ss 9.0 | 27270501 |
| ETIM 5.0 | EC001486 |
| ETIM 6.0 | EC001486 |
| UNSPSC 16.0901 | 41112113 |
