DKV60-E1Z0-S05

10,112,000

Tên sản phẩm: Measuring wheel encoders DKV60

Danh mục: Product portfolio

Model: DKV60-E1Z0-S05

ID: 1035773

Nhà sản xuất: SICK

Xuất xứ: DE

Hàng mới 100%, bảo hành 12 tháng theo quy định nhà sản xuất

Cung cấp chứng nhận xuất xứ (CO), chứng nhận chất lượng (CQ) theo yêu cầu khách hàng

Mã: 1035773 Danh mục:

Mô tả sản phẩm

Product portfolio

Features
Special device ?
Specialty Cable, 8-wire, universal, 3 m with connector M12, 5-pin
Standard reference device DKV60-E1P00003
Performance
? 0,5 mm/m, subject to the measuring wheel (wheel + surface)
? 0,5 mm/m, subject to the measuring wheel (wheel + surface)
Initialization time 40 ms
Electrical data
Electrical interface 10 V … 30 V, HTL/Push pull
Connection type Customized
Load current ? 30 mA
Maximum output frequency ? 200 kHz
Reference signal, number 1
Reference signal, position 90?, electric, logically gated with A and B
MTTFd: mean time to dangerous failure 600 years (EN ISO 13849-1) 1)
    1) This product is a standard product and does not constitute a safety component as defined in the Machinery Directive. Calculation based on nominal load of components, average ambient temperature 40?C, frequency of use 8760 h/a. All electronic failures are considered hazardous. For more information, see document no. 8015532.
Mechanical data
Measuring wheel circumference 200 mm
Measuring wheel surface Knurled 1)
Spring arm design 69.5 mm spring arm
Mass 0.42 kg
Encoder material
Shaft Stainless steel
Flange Zinc cast
Housing Zinc cast
Cable PUR
Spring arm mechanism material
Spring element Spring steel, anti-corrosive
Measuring wheel, spring arm Aluminum
Start up torque 0.6 Ncm (at 20 ?C)
Operating torque 0.4 Ncm (at 20 ?C)
Operating speed ? 1,500 min??
Bearing lifetime 2 x 10^9 revolutions
Maximum travel/deflection of spring arm 8 mm At 14 N spring travel
Recommended pretension 8 N At 4 mm deflection 2)
Max. permissible working area for the spring (continuous operation) ? 1.5 mm
Recommended spring deflection 2 mm … 8 mm
    1) The surface of a measuring wheel is subject to wear. This depends on contact pressure, acceleration behavior in the application, traversing speed, measurement surface, mechanical alignment of the measuring wheel, temperature, and ambient conditions. We recommend you regularly check the condition of the measuring wheel and replace as required.2) When measured from the top of the measuring surface.
Ambient data
EMC According to EN 61000-6-2 and EN 61000-6-3
Enclosure rating IP65
Permissible relative humidity 90 % (condensation of the optical scanning not permitted)
Working temperature range ?10 ?C … +60 ?C
Storage temperature range ?40 ?C … +70 ?C, without package
Classifications
ECl@ss 5.0 27270501
ECl@ss 5.1.4 27270501
ECl@ss 6.0 27270590
ECl@ss 6.2 27270590
ECl@ss 7.0 27270501
ECl@ss 8.0 27270501
ECl@ss 8.1 27270501
ECl@ss 9.0 27270501
ETIM 5.0 EC001486
ETIM 6.0 EC001486
UNSPSC 16.0901 41112113