Mô tả sản phẩm

Product characteristics Electrical design PNP/NPN; (parameterisable) Communication interface IO-Link Dimensions [mm] 250 x 28 x 16.7 Application Media dry bulk material; aqueous solutions; oils Cannot be used for very adhesive media Electrical data Operating voltage [V] 10…30 DC; (18…30 DC: IO-Link) Current consumption [mA] < 50 Protection class III Reverse polarity protection yes Max. power-on delay time [ms] 1300 Inputs / outputs Number of inputs and outputs Number of digital outputs: 3 Outputs Electrical design PNP/NPN; (parameterisable) Number of digital outputs 3 Permanent current rating of switching output DC [mA] 200 Max. resistance switching output [?] 8 Short-circuit protection yes Type of short-circuit protection pulsed Overload protection yes Detection zone Measuring range [mm] < 200 Measuring/setting range Detection range [mm] 228 Set point SP [%] 5…95 Reset point rP [%] 4…94 In steps of [%] 1 Accuracy / deviations Repeatability [% of the final value] 2 Offset deviation [% of the final value] 4 Resolution [% of the final value] 1 Linearity deviation [% of the final value] 1 Response times Response time [ms] 1300 Software / programming Parameter setting options Damping; hysteresis / window; fault indication; diagnostic function; sensitivity; internal temperature; limitation of measuring range; adjustable switching delay; zero-point calibration; direction of installation; LEDs can be deactivated Interfaces Communication interface IO-Link Transmission type COM2 (38,4 kBaud) IO-Link revision 1.1 SDCI standard IEC 61131-9 Profiles Digital Measuring Sensor Profile, Common Profile SIO mode yes Required master port type A Process data analogue 1 Process data binary 3 Min. process cycle time [ms] 9.6 IO-Link functions (cyclical)

function	bit length
process value	16
exponent	8
device status	4
binary switching information	3

IO-Link functions (acyclical) direction of installation; limitation of sensor elements; sensitivity; minimum recognition threshold; Performance in case of a fault; error delay; Damping; LED_Modus; switch-on cycle counter; operating hours counter; switching cycles counter; min./max. process value; internal temperature; min./max. internal temperature; diagnostic data level Supported DeviceIDs

Type of operation	IO-Link device ID
Default	924 d / 00 03 9C h

Note

For further information please see the IODD PDF file at “Downloads”

Operating conditions Applications DIN EN 60654-1 application class B2 Ambient temperature [?C] -20…80 Storage temperature [?C] -25…85 Protection IP 65; IP 67 Tests / approvals EMC

DIN EN 61000-6-4 30 – 230 MHz	40 dB?V/m QP / 10 m distance
230 – 1 GHz	47 dB?V/m QP / 10 m distance
DIN EN 61000-4-2	? 25 kV AD / ? 25 kV CD
DIN EN 61000-4-3	80 MHz – / 1 GHz 10 V/m
DIN EN 61000-4-4	? 2.5 kV / 5 kHz
	? 2.5 kV / 100 kHz
DIN EN 61000-4-6	10 V

Shock resistance

EN 60068-2-27

15 g / 11 ms

Vibration resistance

EN 60068-2-6

5 g (10…2000 Hz)

MTTF [years] 290.43 UL approval

Ta	-25…60 ?C
Enclosure type	Type 1
voltage supply	Limited Voltage/Current
UL Approval no.	D006
File number UL	E174191

Mechanical data Weight [g] 377.5 Dimensions [mm] 250 x 28 x 16.7 Materials PBT; PC; Displays / operating elements Display

operation	1 x LED, green
switching status	3 x LED, yellow
function	20 x LED, green

Accessories Accessories (optional)

adhesive tape: 1 x 23mm x 240mm

Remarks Remarks

when used on IO-Link class B masters switching outputs OUT2, OUT3 have to be switched off

Pack quantity 1 pcs. Electrical connection Connection Connector: 1 x M12 Electrical connection – plug Cable: 0.1 m, PUR