M20E-091A3A122

30,717,000

Tên sản phẩm: Multiple light beam safety devices M2000 Standard / Receiver

Danh mục: Product portfolio

Model: M20E-091A3A122

ID: 1018201

Nhà sản xuất: SICK

Xuất xứ: DE

Hàng mới 100%, bảo hành 12 tháng theo quy định nhà sản xuất

Cung cấp chứng nhận xuất xứ (CO), chứng nhận chất lượng (CQ) theo yêu cầu khách hàng

Mã: 1018201 Danh mục:

Mô tả sản phẩm

Product portfolio

Features
Scanning range 0 m … 25 m, configurable
Low scanning range 0 m … 6 m
Great scanning range 2 m … 25 m
Number of beams 9
Beam separation or resolution 170 mm
Response time 8 ms
Synchronization Optical synchronisation
Safety-related parameters
Type Type 2 (IEC 61496-1)
Safety integrity level

SIL1 (IEC 61508)

SILCL1 (EN 62061)

Category Category 2 (EN ISO 13849)
Test rate (internal test) 13 /s (EN ISO 13849) 1)
Maximum demand rate ? 8 min?? (EN ISO 13849) 2)
Performance level PL c (EN ISO 13849)
PFHD (mean probability of a dangerous failure per hour) 6.6 x 10-9 (EN ISO 13849)
TM (mission time) 20 years (EN ISO 13849)
Safe state in the event of a fault At least one OSSD is in the OFF state.
    1) Internal test. The test rate may not be exceeded if an external test is performed.2) Between two requirements on a safety-related response of the device, at least 100 internal or external tests must be carried out.
Functions
Functions Delivery status
External device monitoring (EDM) ?
Beam coding ? Uncoded
Configurable scanning range ?
Interfaces
System connection
Connection type Male connector M12, 8-pin
Permitted cable length ? 15 m 1)
Permitted cross-section ? 0.25 mm?
Configuration method Hard wired
Display elements

LEDs

7-segment display

Fieldbus, industrial network
Integration via Flexi Soft safety controller CANopen, DeviceNet?, EtherCAT?, EtherNet/IP?, Modbus TCP, PROFIBUS DP, PROFINET 2)
    1) Depending on load, power supply and wire cross-section. The technical specifications must be observed.2) For additional information on Flexi Soft -> www.sick.com/Flexi_Soft.
Electrical data
Protection class III (IEC 61140)
Supply voltage VS 24 V DC (19.2 V DC … 28.8 V DC) 1)
Power consumption ? 5 W (DC)
Output signal switching devices (OSSDs)
Type of output 2 PNP semiconductors, short-circuit protected, cross-circuit monitored 2)
ON state, switching voltage HIGH 24 V DC (VS ? 2.25 V DC … VS)
OFF state, switching voltage LOW ? 1 V DC
Current-carrying capacity per OSSD ? 500 mA
    1) The external voltage supply must be capable of buffering brief mains voltage failures of 20 ms as specified in EN 60204-1. Suitable power supplies are available as accessories from SICK.2) Applies to the voltage range between ?30 V and +30 V.
Mechanical data
Housing cross-section 48 mm x 40 mm
Ambient data
Enclosure rating IP65 (EN 60529)
Ambient operating temperature 0 ?C … +55 ?C
Storage temperature ?25 ?C … +70 ?C
Air humidity 15 % … 95 %, Non-condensing
Vibration resistance 5 g, 10 Hz … 55 Hz (IEC 60068-2-6)
Shock resistance 10 g, 16 ms (IEC 60068-2-29)
Classifications
ECl@ss 5.0 27272703
ECl@ss 5.1.4 27272703
ECl@ss 6.0 27272703
ECl@ss 6.2 27272703
ECl@ss 7.0 27272703
ECl@ss 8.0 27272703
ECl@ss 8.1 27272703
ECl@ss 9.0 27272703
ETIM 5.0 EC001832
ETIM 6.0 EC001832
UNSPSC 16.0901 46171620