Mô tả sản phẩm
Opto-electronic protective devices
Features
| System part |
Receiver |
| Resolution |
14 mm |
| Protective field height |
300 mm |
| Scanning range |
10 m |
| Response time |
|
| Without beam coding |
11 ms |
| With beam coding |
17 ms |
|
| Synchronization |
Optical synchronisation |
Safety-related parameters
| Type |
Type 4 (IEC 61496-1) |
| Safety integrity level |
SIL3 (IEC 61508)
SILCL3 (EN 62061)
|
| Category |
Category 4 (EN ISO 13849) |
| Performance level |
PL e (EN ISO 13849) |
| PFHD (mean probability of a dangerous failure per hour) |
28 * 10-9 (EN ISO 13849) |
| TM (mission time) |
20 years (EN ISO 13849) |
| Safe state in the event of a fault |
At least one OSSD is in the OFF state. |
Functions
|
Functions |
Delivery status |
| Restart interlock |
? |
Internal |
| External device monitoring (EDM) |
? |
Activated |
| Beam coding |
? |
Uncoded |
| Configurable status output (ADO) |
? |
Contamination (OWS) |
| Sender test |
? |
Deactivated |
| Configurable scanning range |
? |
Low scanning range |
| Safe SICK device communication via EFI |
? |
| Differentiation between man and material (muting) |
? |
Functions – Functions in combination with UE403
| Concurrence monitoring |
? |
| Monitoring of total muting time |
? |
| Sensor gap monitoring |
? |
| Belt stop |
? |
| Muting with override |
? |
| Exit monitoring |
? |
| End of muting by ESPE |
? |
Interfaces
| System connection |
|
| Connection type |
Hirschmann male connector M26, 12-pin |
| Permitted cable length |
? 50 m 1) |
| Permitted cross-section |
? 0.75 mm? |
|
| Extension connection |
Female connector M12, 5-pin |
| Configuration method |
Via software |
| Configuration connection |
Female connector M8, 4-pin |
| Display elements |
7-segment display |
| Status display |
LEDs |
| End cap with integrated LED on the receiver |
? |
| Fieldbus, industrial network |
|
| Integration via EFI gateways |
CANopen, Ethernet, PROFIBUS DP, PROFIBUS PROFIsafe, PROFINET PROFIsafe 2) |
| Integration via Flexi Soft safety controller |
CANopen, DeviceNet?, EtherCAT?, EtherNet/IP?, Modbus TCP, PROFIBUS DP, PROFINET 3) |
|
Electrical data
| Protection class |
III (IEC 61140) |
| Supply voltage VS |
24 V DC (19.2 V … 28.8 V) |
| Residual ripple |
? 10 % 1) |
| Power consumption |
? 0.8 A |
| Output signal switching devices (OSSDs) |
|
| Type of output |
2 PNP semiconductors, short-circuit protected, cross-circuit monitored 2) |
| ON state, switching voltage HIGH |
24 V DC (VS ? 2.25 V DC … VS) |
| OFF state, switching voltage LOW |
? 2 V DC |
| Current-carrying capacity per OSSD |
? 500 mA |
|
| Diagnostic outputs |
|
| Type of output |
PNP semiconductor, short-circuit protected 2) |
| ON state, switching voltage HIGH |
24 V DC (VS ? 4.2 V DC … VS) |
| OFF state, switching voltage LOW |
High resistance |
| Current-carrying capacity per OSSD |
? 100 mA |
|
Mechanical data
| Housing cross-section |
52 mm x 55.5 mm |
| Housing material |
Aluminum alloy ALMGSI 0.5 |
| Surface treatment |
Powder coated |
| Front screen material |
Polycarbonate, scratch-resistant coating |
Ambient data
| Enclosure rating |
IP65 (EN 60529) |
| Ambient operating temperature |
?30 ?C … +55 ?C |
| Storage temperature |
?30 ?C … +70 ?C |
| Air humidity |
15 % … 95 %, Non-condensing |
| Vibration resistance |
5 g, 10 Hz … 55 Hz (IEC 60068-2-6) |
| Shock resistance |
10 g, 16 ms (EN 60068-2-29) |
Other information
Classifications
| ECl@ss 5.0 |
27272704 |
| ECl@ss 5.1.4 |
27272704 |
| ECl@ss 6.0 |
27272704 |
| ECl@ss 6.2 |
27272704 |
| ECl@ss 7.0 |
27272704 |
| ECl@ss 8.0 |
27272704 |
| ECl@ss 8.1 |
27272704 |
| ECl@ss 9.0 |
27272704 |
| ETIM 5.0 |
EC002549 |
| ETIM 6.0 |
EC002549 |
| UNSPSC 16.0901 |
46171620 |
