PKS09-ATBM0520

29,493,000

Tên sản phẩm: Wire draw encoders Compact

Danh mục: Product portfolio

Model: PKS09-ATBM0520

ID: 1035243

Nhà sản xuất: SICK

Xuất xứ: DE

Hàng mới 100%, bảo hành 12 tháng theo quy định nhà sản xuất

Cung cấp chứng nhận xuất xứ (CO), chứng nhận chất lượng (CQ) theo yêu cầu khách hàng

Mã: 1035243 Danh mục:

Mô tả sản phẩm

Product portfolio

Performance
Measurement range 0 m … 5 m
Linearity ? ? 0.7 mm
Measuring step ? 0.05 mm
Traversing speed 3.5 m/s
Repeat accuracy, typ. 3 measuring steps
Interfaces
Encoder Incremental encoders
Electrical interface Incremental / TTL / RS-422
Connection type Male connector M23, 12-pin, radial
Electrical data
Operating current 60 mA (without load)
Reference signal 1/765 measuring steps
Maximum load current ? 20 mA
Initialization time 1)
Supply voltage 4.5 V … 5.5 V
MTTFd: mean time to dangerous failure 400 years (EN ISO 13849) 2)
    1) Valid positional data can be read once this time has elapsed.2) This product is a standard product and does not constitute a safety component as defined in the Machinery Directive. Calculation based on nominal load of components, average ambient temperature 40?C, frequency of use 8760 h/a. All electronic failures are considered hazardous. For more information, see document no. 8015532.
Mechanical data
Weight (mechanics) 1.5 kg
Measuring wire material Highly flexible stranded steel (PA 12 sheathed)
Housing material Aluminum
Spring return force 4 N … 6 N 1)
Life of wire draw mechanism Typ. 800,000 cycles 2) 3)
Measuring wire diameter 0.6 mm
Wire acceleration ? 20 m/s?
    1) These values were measred at an ambient temperature of 25 ?C. There may be variations at other temperatures.2) A cycle consists of the wire being pulled out and drawn in.3) The service life depends on the type of load. This is influenced by environmental conditions, the installation location, the measuring range in use, the traversing speed, and acceleration.
Ambient data
EMC According to EN 61000-6-2 and EN 61000-6-3
Enclosure rating encoder IP52, Note required mounting position (according to IEC 60529)
Resistance to shocks 20 g, 6 ms (according to EN 60068-2-27)
Frequency range of resistance to vibrations 10 g, 10 Hz … 2,000 Hz (according to EN 60068-2-6)
Working temperature range (encoder) ?10 ?C … +70 ?C
Storage temperature range ?20 ?C … +80 ?C
Relative humidity/condensation 90 % (Condensation not permitted)
Classifications
ECl@ss 5.0 27270590
ECl@ss 5.1.4 27270590
ECl@ss 6.0 27270590
ECl@ss 6.2 27270590
ECl@ss 7.0 27270590
ECl@ss 8.0 27270590
ECl@ss 8.1 27270590
ECl@ss 9.0 27270590
ETIM 5.0 EC001486
ETIM 6.0 EC001486
UNSPSC 16.0901 41112113