Mô tả sản phẩm
Encoders
Performance
| Measuring step | 0.244 ?m For interpolation of the sine/cosine signals with, e. g., 12 bits |
| Measuring length | ? 3,920 mm |
| Resolution | 1 ?m |
| Length of period | 1 mm |
| Traversing speed | ? 10 m/s, 1.3 m/s, up to which the absolute position can be reliably produced |
| Repeatability | < 5 ?m |
| System accuracy | ? 10 ?m (+20 ?C) |
| Measured value backlash | < 10 ?m |
Interfaces
| Communication interface | HIPERFACE? |
| Code type | Binary |
| Available memory area | 1,792 Byte (E2PROM 2048) |
Electrical data
| Supply voltage | 7 V DC … 12 V DC |
| Recommended supply voltage | 8 V DC |
| Operating current | ? 65 mA (without load) 1) |
| Connection type | Cable, 8-wire, 0.5 m |
- 1) 100 mA approx. during adjustment.
Mechanical data
| Dimensions | See dimensional drawing |
| Weight | 0.08 kg |
| Read head material | Zinc diecast |
Ambient data
| EMC | According to EN 61000-6-2 and EN 61000-6-3 1) |
| Enclosure rating | IP67, with mating connector inserted (according to IEC 60529) |
| Operating temperature range | ?30 ?C … +80 ?C |
| Storage temperature range | ?40 ?C … +85 ?C, without package |
| Permissible relative humidity | 100 %, condensation permitted |
| Resistance to shocks | 30 g, 6 ms (EN 60068-2-27) |
| Resistance to vibration | 20 g, 10 Hz … 2,000 Hz (EN 60068-2-6) |
| Maximum permitted ambient field strength | < 3 kA/m ... 4 kA/m (3.8 mT ... 5 mT), to guarantee compliance with the quoted accuracy values 2) |
| Maximum permitted field strength | < 150 kA/m (< 190 mT), to ensure that the magnetic tape is not permanently damaged |
- 1) The EMC according to the standards quoted is achieved when the motor feedback system with put-on mating connector is connected to the central earthing point of the motor controller via a cable screen and via the encoder housing extensive connected to the motor potential. Users must perform their own tests when other screening designs are used.2) The maximum permitted external field influence is reached when the position value deviates from the original value (without external field influence) by more than 5 ?m. This value is reached when, at the sensor location, a field strength of 3 kA/m to 4 kA/m (3.8 mT to 5 mT) occurs in addition to the field strength of the magnetic tape.
Classifications
| ECl@ss 5.0 | 27270705 |
| ECl@ss 5.1.4 | 27270705 |
| ECl@ss 6.0 | 27270705 |
| ECl@ss 6.2 | 27270705 |
| ECl@ss 7.0 | 27270705 |
| ECl@ss 8.0 | 27270705 |
| ECl@ss 8.1 | 27270705 |
| ECl@ss 9.0 | 27270705 |
| ETIM 5.0 | EC002544 |
| ETIM 6.0 | EC002544 |
| UNSPSC 16.0901 | 41111613 |
