Mô tả sản phẩm
Photoelectric sensors
Features
| Sensor/ detection principle | Photoelectric retro-reflective sensor, autocollimation |
| Dimensions (W x H x D) | 15.5 mm x 48.5 mm x 42 mm |
| Housing design (light emission) | Rectangular |
| Sensing range max. | 0 m … 1.5 m 1) |
| Type of light | Visible red light |
| Light source | PinPoint LED 2) |
| Light spot size (distance) | 1.5 mm x 9 mm (60 mm) |
| Wave length | 660 nm |
| Adjustment | Single teach-in button 3) |
| AutoAdapt | ? |
| Special applications | Detecting transparent objects |
| Special features | Mode III, 40 % attenuation |
- 1) Reflector PL80A.2) Average service life: 100,000 h at TU = +25 ?C.3) Mode I, 10 % attenuation.
Mechanics/electronics
| Supply voltage | 10 V DC … 30 V DC 1) |
| Ripple | ? 5 Vpp 2) |
| Power consumption | 40 mA 3) |
| Switching output | PNP |
| Switching mode | Light switching |
| Signal voltage PNP HIGH/LOW | Approx. VS ? 2.5 V / 0 V |
| Output current Imax. | 100 mA |
| Response time | ? 333 ?s 4) |
| Switching frequency | ? 1,500 Hz 5) |
| Connection type | Male connector M12, 5-pin |
| Circuit protection |
A 6) B 7) C 8) D 9) |
| Protection class | III |
| Weight | 120 g |
| Polarisation filter | ? |
| Special device | ? |
| Housing material | Metal, Zinc diecast |
| Optics material | Plastic, PMMA |
| Enclosure rating |
IP66 IP67 |
| Special feature | Detecting transparent objects |
| Operating mode | Mode I, 10 % attenuation, Mode II, 18 % attenuation, Mode III, 40 % attenuation |
| Plausibility output, stable detection | Approx. 0 V |
| Plausibility output, unstable detection | VS – 2.5 V |
| Ambient operating temperature | ?40 ?C … +60 ?C |
| Ambient storage temperature | ?40 ?C … +75 ?C |
| UL File No. | NRKH.E181493 & NRKH7.E181493 |
- 1) Limit values when operated in short-circuit protected network: max. 8 A.2) May not exceed or fall below Uv tolerances.3) Without load.4) Signal transit time with resistive load.5) With light/dark ratio 1:1.6) A = VS connections reverse-polarity protected.7) B = inputs and output reverse-polarity protected.8) C = interference suppression.9) D = outputs overcurrent and short-circuit protected.
Classifications
| ECl@ss 5.0 | 27270902 |
| ECl@ss 5.1.4 | 27270902 |
| ECl@ss 6.0 | 27270902 |
| ECl@ss 6.2 | 27270902 |
| ECl@ss 7.0 | 27270902 |
| ECl@ss 8.0 | 27270902 |
| ECl@ss 8.1 | 27270902 |
| ECl@ss 9.0 | 27270902 |
| ETIM 5.0 | EC002717 |
| ETIM 6.0 | EC002717 |
| UNSPSC 16.0901 | 39121528 |
