WSE250-2N2431

7,009,000

Tên sản phẩm: W250-2

Danh mục: W250-2

Model: WSE250-2N2431

ID: 6044711

Nhà sản xuất: SICK

Xuất xứ: CN

Hàng mới 100%, bảo hành 12 tháng theo quy định nhà sản xuất

Cung cấp chứng nhận xuất xứ (CO), chứng nhận chất lượng (CQ) theo yêu cầu khách hàng

Mã: 6044711 Danh mục:

Mô tả sản phẩm

W250-2

Features
Sensor/ detection principle Through-beam photoelectric sensor
Dimensions (W x H x D) 20 mm x 65 mm x 43.9 mm
Housing design (light emission) Rectangular
Sensing range max. 0 m … 50 m
Sensing range 0 m … 40 m
Type of light Visible red light
Light source LED 1)
Light spot size (distance) ? 0.6 m (20 m)
Angle of dispersion Approx. 2?
Adjustment Potentiometer, 2 turns 2)
    1) Average service life: 100,000 h at TU = +25 ?C.2) With position indicator.
Mechanics/electronics
Supply voltage 10 V DC … 30 V DC 1)
Ripple ? 5 Vpp 2)
Power consumption, sender 20 mA 3)
Power consumption, receiver 20 mA 3)
Switching output NPN
Switching mode Light/dark switching
Switching mode selector Selectable via L/D control cable
Output current Imax. ? 100 mA
Response time ? 0.5 ms 4)
Switching frequency 1,000 Hz 5)
Angle of reception 20?
Connection type Male connector M12, 4-pin 6)
Circuit protection

A 7)

B 8)

C 9)

D 10)

Protection class III
Weight 80 g
Housing material Plastic, ABS
Optics material Plastic, PMMA
Enclosure rating IP67
Items supplied BEF-W250 mounting bracket
EMC EN 60947-5-2 11)
Ambient operating temperature ?25 ?C … +55 ?C
Ambient storage temperature ?40 ?C … +70 ?C
MTTFd: mean time to dangerous failure 3,252 years
UL File No. NRKH2.E300503 & NRKH8.E300503
    1) Limit values when operated in short-circuit protected network: max. 8 A.2) May not exceed or fall below Uv tolerances.3) Without load.4) Signal transit time with resistive load.5) With light/dark ratio 1:1.6) Rotatable through 90?.7) A = VS connections reverse-polarity protected.8) B = inputs and output reverse-polarity protected.9) C = interference suppression.10) D = outputs overcurrent and short-circuit protected.11) The AC/DC devices comply with the Radio Safety Requirements for the industrial sector (Radio Safety Class A). They may cause radio interference if used in a residential area.
Classifications
ECl@ss 5.0 27270901
ECl@ss 5.1.4 27270901
ECl@ss 6.0 27270901
ECl@ss 6.2 27270901
ECl@ss 7.0 27270901
ECl@ss 8.0 27270901
ECl@ss 8.1 27270901
ECl@ss 9.0 27270901
ETIM 5.0 EC002716
ETIM 6.0 EC002716
UNSPSC 16.0901 39121528