Mô tả sản phẩm
Photoelectric sensors
Features
| Sensor/ detection principle | Photoelectric proximity sensor, Background suppression |
| Dimensions (W x H x D) | 12.2 mm x 41.8 mm x 17.3 mm |
| Housing design (light emission) | Rectangular |
| Sensing range max. | 4 mm … 180 mm 1) |
| Sensing range | 10 mm … 180 mm 1) |
| Type of light | Visible red light |
| Light source | PinPoint LED 2) |
| Light spot size (distance) | ? 6.5 mm (150 mm) |
| Wave length | 650 nm |
| Adjustment |
IO-Link Single teach-in button |
| Pin 2 configuration | External input, Teach-in input, Sender off input, Detection output, logic output |
- 1) Object with 90 % reflectance (referred to standard white, DIN 5033).2) Average service life: 100,000 h at TU = +25 ?C.
Mechanics/electronics
| Supply voltage | 10 V DC … 30 V DC 1) |
| Ripple | < 5 Vpp 2) |
| Power consumption | 30 mA 3) |
| Switching output | PNP |
| Switching mode | Light/dark switching |
| Output current Imax. | ? 100 mA |
| Response time Q/ on Pin 2 | 300 ?s … 450 ?s 4) 5) |
| Switching frequency | 1,000 Hz |
| Switching frequency Q / to pin 2 | 1,000 Hz 6) |
| Connection type | Male connector M8, 4-pin |
| Circuit protection |
A 7) B 8) C 9) D 10) |
| Protection class | III |
| Weight | 20 g |
| IO-Link | ? |
| Transmission rate | COM2 |
| Housing material | Plastic, ABS |
| Optics material | Plastic, PMMA |
| Enclosure rating |
IP67 IP66 |
| Ambient operating temperature | ?40 ?C … +60 ?C |
| Ambient storage temperature | ?40 ?C … +75 ?C |
| UL File No. | NRKH.E181493 & NRKH7.E181493 |
| Repeatability Q/ on Pin 2: | 150 ?s 5) |
- 1) Limit values when operated in short-circuit protected network: max. 8 A.2) May not exceed or fall below Uv tolerances.3) Without load.4) Signal transit time with resistive load.5) Valid for Q on Pin2, if configured with software.6) With light / dark ratio 1:1, valid for Q on Pin2, if configured with software.7) A = VS connections reverse-polarity protected.8) B = inputs and output reverse-polarity protected.9) C = interference suppression.10) D = outputs overcurrent and short-circuit protected.
Classifications
| ECl@ss 5.0 | 27270904 |
| ECl@ss 5.1.4 | 27270904 |
| ECl@ss 6.0 | 27270904 |
| ECl@ss 6.2 | 27270904 |
| ECl@ss 7.0 | 27270904 |
| ECl@ss 8.0 | 27270904 |
| ECl@ss 8.1 | 27270904 |
| ECl@ss 9.0 | 27270904 |
| ETIM 5.0 | EC002719 |
| ETIM 6.0 | EC002719 |
| UNSPSC 16.0901 | 39121528 |
Smart Task
| Smart Task name | Timestamp + debouncing |
| Logic function |
Direct AND OR WINDOW Hysteresis |
| Timer function |
Deactivated On delay Off delay ON and OFF delay Impulse (one shot) |
| Inverter | Yes |
| Response time |
SIO Direct: 300 ?s … 450 ?s 1) SIO Logic: 800 ?s … 950 ?s 2) IOL: — 3) |
| Time stamp accuracy |
SIO Direct: — 1) SIO Logic: — 2) IOL: – 80 … + 330 ?s 3) |
| Repeatability |
SIO Direct: 150 ?s 1) SIO Logic: 150 ?s 2) IOL: — 3) |
| Min. Time between two process events (switches) |
SIO Direct: 450 ?s 1) SIO Logic: 500 ?s 2) IOL: 800 ?s 3) |
| Time stamp number buffer |
SIO Direct: — 1) SIO Logic: — 2) IOL: 8 3) |
| Max. TimeStamp Range |
SIO Direct: — 1) SIO Logic: — 2) IOL: 260 ms 3) |
| Debounce time max. |
SIO Direct: — SIO Logic: 52 ms IOL: 52 ms |
| Switching signal QL1 | Switching output |
| Switching signal QL2 | Switching output |
| Measuring value | Timestamp |
- 1) SIO Direct: sensor operation in standard I/O mode without IO-Link communication and without using internal sensor logic or time parameters (set to “direct”/”deactivated”).2) SIO Logic: Sensor operation in standard I/O mode without IO-Link communication. Sensor-internal logic or timing parameters plus Automation Functions used.3) IOL: Sensor operation with full IO-Link communication and usage of logic, timing and Automation Function parameters.
Communication interface
| Communication interface | IO-Link V1.1 |
| Communication Interface detail | COM2 (38,4 kBaud) |
| Cycle time | 2.3 ms |
| Process data length | 16 Bit |
| Process data structure |
Bit 0 = switching signal QL1 Bit 1 = switching signal QL2 Bit 2 … 15 = measuring value |
