Mô tả sản phẩm
Photoelectric sensors
| Sensor/ detection principle | Photoelectric proximity sensor |
| Dimensions (W x H x D) | 42 mm x 42 mm x 45 mm |
| Housing design (light emission) | Rectangular |
| Type of light | Visible red light |
| Light source | PinPoint LED 1) |
| Wave length | 635 nm |
| Adjustment | IO-Link |
| Special applications | Zero gap detection |
| Key feature of the object | Edges, Smoothed edges, rounded out body and prism shaped, shiny and prismatic edges, edges in uneven surfaces |
| Operating mode | Packaging, packaging “Oversize Fit”, folded boxes, folded boxes “Slim Fit” 2) |
| Packaging operating mode |
Key feature of the object: rounded edges Background suppression: ? 80 mm Object height min.: ? 50 mm Object width min.: ? 20 mm Radius of the object contour: 2 mm … 5 mm Sensing range: 30 mm … 35 mm ? Key feature of the object: rounded out body and prism shaped Object width min.: ? 30 mm Radius of the object contour: 5 mm … 20 mm Sensing range: 30 mm … 40 mm |
| Packaging ?Oversize Fit? operating mode |
Key feature of the object: shiny and prismatic edges Background suppression: ? 60 mm Object height min.: ? 30 mm Object width min.: ? 30 mm Radius of the object contour: 5 mm … 20 mm Sensing range: 30 mm … 40 mm |
| Folded Box operating mode |
Key feature of the object: edges Background suppression: ? 60 mm Object height min.: ? 30 mm Object width min.: ? 10 mm Radius of the object contour: 1 mm … 2 mm Sensing range: 30 mm ? 2 mm |
| Folded Box ?Slim Fit? operating mode |
Key feature of the object: edges in uneven surfaces Background suppression: ? 60 mm Object height min.: ? 30 mm Object width min.: ? 10 mm Radius of the object contour: 1 mm … 2 mm Sensing range: 30 mm ? 2 mm |
- 1) Average service life: 100,000 h at TU = +25 ?C.2) See “technical information” in the tap “Downloads” “Literature”.
| Supply voltage | 10 V DC … 30 V DC 1) |
| Ripple | ? 5 Vpp 2) |
| Power consumption | 70 mA 3) |
| Switching output | PNP |
| Output current Imax. | ? 100 mA 4) |
| Connection type | Male connector M12, 4-pin |
| Circuit protection |
A 5) B 6) C 7) |
| Protection class | III |
| Weight | 130 g |
| IO-Link | ? |
| Transmission rate | COM2 |
| Housing material | Plastic, Novodur |
| Enclosure rating | IP67 |
| Ambient operating temperature | ?40 ?C … +55 ?C |
| Ambient storage temperature | ?40 ?C … +75 ?C |
| Productivity max. | ? 200,000 pcs./h |
| Object speed max. | 0.6 m/s … 3 m/s 8) |
| Recommended object speed | 0.05 m/s … 0.25 m/s |
| Switching accuracy | ? 2 x radius |
| Repeatability (Ta not constant) | typ. < 1 mm |
| Switch on delay Q1 & Q2 | 0 ms … 255 ms |
| Time delay off Q1 | 0 ms … 255 ms |
- 1) Limit values, reverse-polarity protected, operation in short-circuit protected network: max. 8 A.2) May not exceed or fall below Uv tolerances.3) At 24 V.4) 2 switching outputs with Imax = 100 mA.5) A = VS connections reverse-polarity protected.6) B = inputs and output reverse-polarity protected.7) C = interference suppression.8) Details see in the characteristic curves speed.
| ECl@ss 5.0 | 27270904 |
| ECl@ss 5.1.4 | 27270904 |
| ECl@ss 6.0 | 27270904 |
| ECl@ss 6.2 | 27270904 |
| ECl@ss 7.0 | 27270904 |
| ECl@ss 8.0 | 27270904 |
| ECl@ss 8.1 | 27270904 |
| ECl@ss 9.0 | 27270904 |
| ETIM 5.0 | EC002719 |
| ETIM 6.0 | EC002719 |
| UNSPSC 16.0901 | 39121528 |
