Mô tả sản phẩm
Photoelectric sensors
Features
| Sensor/ detection principle | Photoelectric proximity sensor, Background suppression |
| Dimensions (W x H x D) | 20 mm x 49.6 mm x 44.2 mm |
| Housing design (light emission) | Rectangular |
| Sensing range max. | 50 mm … 3,800 mm 1) |
| Sensing range | 100 mm … 3,800 mm 2) |
| Distance value-measuring range | 100 mm … 3,800 mm 1) |
| Distance value-resolution | 1 mm |
| Distance value-repeatability | 1,1 mm … 3,0 mm 3) 4) 5) |
| Distance value-accuracy | Typ. ? 15 mm |
| Type of light | Visible red light |
| Light source | Laser 6) |
| Light spot size (distance) | ? 18 mm (3,800 mm) |
| Wave length | 658 nm |
| Laser class | 1 (IEC 60825-1 / CDRH 21 CFR 1040.10 & 1040.11) |
| Adjustment | Single teach-in button (2 x) |
- 1) Object with 6 … 90 % remission (based on standard white to DIN 5033).2) Adjustable.3) Equivalent to 1 ?.4) See characteristic curves repeatability.5) 6 % … 90 % remission.6) Average service life: 100,000 h at TU = +25 ?C.
Mechanics/electronics
| Supply voltage | 12 V DC … 30 V DC 1) 2) |
| Ripple | ? 5 Vpp 3) |
| Power consumption | 70 mA 4) |
| Switching output | PUSH/PULL, PNP, NPN 5) |
| Number of switching outputs | 1 (Q1) 5) |
| Switching mode | Light switching 5) |
| Output current Imax. | ? 50 mA |
| Response time | ? 5 ms 6) |
| Switching frequency | 100 Hz 7) |
| Analog output | 4 mA … 20 mA (? 450 ?) / 0 V … 10 V (? 50 k?) / switchable |
| Resolution of analog output | 12 bit |
| Output time | ? 5 ms |
| Input | Sender off |
| Connection type | Male connector M12, 5-pin |
| Circuit protection |
A 8) B 9) C 10) |
| Protection class | III |
| Weight | 48 g |
| Housing material | Plastic, VISTAL? |
| Optics material | Plastic, PMMA |
| Enclosure rating | IP67 |
| Ambient operating temperature | ?35 ?C … +50 ?C 11) |
| Ambient storage temperature | ?40 ?C … +70 ?C |
| Warm-up time | < 15 min 12) |
| Initialization time | < 300 ms |
| UL File No. | NRKH.E181493 |
- 1) Limit values. Operated in short-circuit protected network: max. 8 A.2) Vs min when using the voltage output = 13 V.3) May not exceed or fall below Uv tolerances.4) Without load. At VS = 24 V.5) Q1 = 1 switching threshold, light switching.6) Signal transit time with resistive load.7) With light/dark ratio 1:1.8) A = VS connections reverse-polarity protected.9) B = inputs and output reverse-polarity protected.10) C = interference suppression.11) For Vs ? 24 V. When Tu = 45 ?C or above, a maximum load resistance of 300 ? … 450 ? is permitted on QA.12) Below Ta = ?10 ?C a warm-up time is required.
Classifications
| ECl@ss 5.0 | 27270904 |
| ECl@ss 5.1.4 | 27270904 |
| ECl@ss 6.0 | 27270904 |
| ECl@ss 6.2 | 27270904 |
| ECl@ss 7.0 | 27270904 |
| ECl@ss 8.0 | 27270904 |
| ECl@ss 8.1 | 27270904 |
| ECl@ss 9.0 | 27270904 |
| ETIM 5.0 | EC002719 |
| ETIM 6.0 | EC002719 |
| UNSPSC 16.0901 | 39121528 |
