Mô tả sản phẩm
Photoelectric sensors
Features
| Sensor/ detection principle | Photoelectric proximity sensor, Background suppression |
| Dimensions (W x H x D) | 20 mm x 49.6 mm x 44.2 mm |
| Housing design (light emission) | Rectangular |
| Sensing range max. | 50 mm … 2,500 mm 1) |
| Sensing range | 100 mm … 2,500 mm 2) |
| Distance value-measuring range | 50 mm … 2,500 mm 1) |
| Distance value-resolution | 1 mm |
| Distance value-repeatability | 2,3 mm … 6,1 mm 3) 4) 5) |
| Distance value-accuracy | Typ. ? 15 mm |
| Type of light | Visible red light |
| Light source | Laser 6) |
| Light spot size (distance) | ? 14 mm (2,500 mm) |
| Wave length | 658 nm |
| Laser class | 1 (IEC 60825-1 / CDRH 21 CFR 1040.10 & 1040.11) |
| Adjustment |
Single teach-in button (2 x) IO-Link |
- 1) Object with 6 … 90 % remission (based on standard white to DIN 5033).2) Adjustable.3) Equivalent to 1 ?.4) See characteristic curves repeatability.5) 6 % … 90 % remission.6) Average service life: 100,000 h at TU = +25 ?C.
Mechanics/electronics
| Supply voltage | 10 V DC … 30 V DC 1) 2) |
| Ripple | ? 5 Vpp 3) |
| Power consumption | 70 mA 4) |
| Switching output | PUSH/PULL, PNP, NPN 5) |
| Number of switching outputs | 2 (Q1, Q2) 5) |
| Switching mode | Light switching 5) |
| Output current Imax. | ? 100 mA |
| Response time | ? 0.5 ms 6) |
| Switching frequency | 1,000 Hz 7) |
| Analog output | – |
| Input | MFin = multifunctional input programmable |
| Connection type | Male connector M12, 5-pin |
| Circuit protection |
A 8) B 9) C 10) |
| Protection class | III |
| Weight | 48 g |
| Housing material | Plastic, VISTAL? |
| Optics material | Plastic, PMMA |
| Enclosure rating | IP67 |
| Ambient operating temperature | ?35 ?C … +50 ?C 11) |
| Ambient storage temperature | ?40 ?C … +70 ?C |
| Warm-up time | < 15 min 12) |
| Initialization time | < 300 ms |
| UL File No. | NRKH.E181493 |
- 1) Limit values. Operated in short-circuit protected network: max. 8 A.2) Vs min at IO-Link operation = 18 V.3) May not exceed or fall below Uv tolerances.4) Without load. At VS = 24 V.5) Q1, Q2 = 2 switching thresholds, light switching.6) Signal transit time with resistive load.7) With light/dark ratio 1:1.8) A = VS connections reverse-polarity protected.9) B = inputs and output reverse-polarity protected.10) C = interference suppression.11) As of Ta = 45 ?C, a max.load current Imax = 50 mA is permitted.12) Below Ta = ?10 ?C a warm-up time is required.
Classifications
| ECl@ss 5.0 | 27270904 |
| ECl@ss 5.1.4 | 27270904 |
| ECl@ss 6.0 | 27270904 |
| ECl@ss 6.2 | 27270904 |
| ECl@ss 7.0 | 27270904 |
| ECl@ss 8.0 | 27270904 |
| ECl@ss 8.1 | 27270904 |
| ECl@ss 9.0 | 27270904 |
| ETIM 5.0 | EC002719 |
| ETIM 6.0 | EC002719 |
| UNSPSC 16.0901 | 39121528 |
Communication interface
| Communication interface | IO-Link V1.1 |
| Communication Interface detail | COM2 (38,4 kBaud) |
| Cycle time | 5 ms |
| Process data length | 32 Bit |
| Process data structure |
Bit 0 = switching signal QO1 Bit 1 = switching signal QO2 Bit 2 … 8 = BDC 2 … 8 Bit 9 … 15 = empty Bit 16 … 31 = distance value |
| Additional features | 8 switching points for distance to object, of which 2 can be inverted, 1 switching point as switching window or configurable with hysteresis., multifunctional input: sender off, external teach, inactive |
