Product Description
Your advantages
- Increased starting torque
- Large permitted overhung loads of the reduction gear units
- Large number of finely spaced gear ratios of the reduction gear unit, depending on size
- Choice of manual or remote speed control
- Intuitive operation
The foot- and flange-mounted versions can also be used to power machines without a reduction gear unit.
Speed can be adjusted mechanically, e.g. with a handwheel, or electromechanically using a servo motor. Multi-speed motors can be applied for further enlargement of the setting range of variable speed gear units.
Series D VARIMOT® friction disk variable speed gearmotors are intended for power ranges up to 2.2 kW (3.0 hp) and speed setting range 1:5. The contact pressure between the driving pulley and the friction ring required for torque transmission is set automatically. The speed control can be adjusted even when the gearmotor is at a standstill.
|
Technical data
|
||
|
VARIMOT®
|
Maximum motor power [kW] ([hp])
|
Maximum setting range
|
|
D 16
|
1.1 (1.5)
|
1 : 5
|
|
D 26
|
2.2 (3.0)
|
1 : 5
|
Công Ty TNHH Thiết Bị Công Nghiệp Sao Việt chuyên cung cấp máy móc, thiết bị, phụ tùng các loại máy, kết hợp với các dịch vụ lắp đặt sửa chữa, bảo trì các loại máy móc, thiết bị công nghiệp.