Product Description
B35 Regulator
Features + Benefits
With a malleable iron body, the B35 will handle inlet pressures up to 1000 PSIG. Outlet pressures range from 5 to 150 PSIG. Seven different orifices are available from 1/16″ through 1/2″ in either brass or stainless steel. They are interchangeable in all valve body sizes.
The three versions of this model include:
- B35R – When properly sized, the B35R can be used for multi-regulator cuts with complete safety on installations up to 1000 PSIG inlet with reductions up to 150 PSIG and ultimately to 7″ W.C. outlet without an external relief valve and will conform to the ANSI B31.8 code.
- B35N – Standard field service regulator. Used primarily where internal relief is not required. It has a breather vent in the upper diaphragm case – 1/4″ NPT with stainless steel screen and complete water drain position.
- B35M – Special B35 unit with sealed throat and downstream control tap. Used in series monitoring installations as an operating safety device that assumes control over the operating regulator when a failure is sensed by the downstream control line.vv
Công Ty TNHH Thiết Bị Công Nghiệp Sao Việt chuyên cung cấp máy móc, thiết bị, phụ tùng các loại máy, kết hợp với các dịch vụ lắp đặt sửa chữa, bảo trì các loại máy móc, thiết bị công nghiệp.
