Product Description

SAER Domestic Pumps Self-priming AP97

CHARACTERISTICS Pump body, impeller, support lantern and inlet in cast iron. valve (clapper) nitrile rubber / steel. Mechanical seal in carbon / ceramic, at the request of tungsten carbide / tungsten carbide. Engine type electric enclosed fan rotor shaft mounted on ball bearings lubricated. Upon request it is possible to supply the motors with a built in thermal overload protection, the capacitor is permanently on in the single-phase version. Protection level of motor: IP 44, on request IP 55. Insulation class: F Standard voltage: 230V – 50Hz single phase 230V/400V – 50Hz for three phase version Special features on request. DATA – Flow rates up to 30 m3 / h – Head up to 16.5 m. – Temperature of pumped liquid from -1 5 ° C to +70 ° C – Maximum operating pressure: 6 bar – Maximum ambient temperature: 40 ° C (For higher.) The operating characteristics and catalog, are for continuous service and water clean (specific gravity = 1000 kg/m3). Manometric suction lift up to 8 m To the tolerances of the hydraulic characteristics of the norms UNI / ISO 2548 – Class C – Appendix B, while for the electric caratterisiche turn to CEI. Hydraulic characteristics Dimensions and weights Nomenclature