Product Description

SAER SUBMERSIBLE MONOBLOCK MBS 6

FEATURES Construction features Outer jacket: made ​​completely in stainless steel AISI 304, including threaded delivery port 1 1/4 “G. impellers and diffusers: thermoplastic resin resistant to abrasion. Diffusers fitted with wear rings self-adjusting. pump and motor shaft in one piece completely in stainless steel AISI 431, supported at three points. bearings lubricated for life. Sealing system: two mechanical seals: seal on motor side graphite / alumina oxide seal on pump side oxide alumina / silicon carbide. Interposed oil chamber (oil -toxic FDA-approved). Protection: IP68 Motor: asynchronous induction, with outer jacket in AISI 304 stainless steel, cooled by the pumped liquid. The pump-motor unit is easily dismantled and repaired. Versions phase: 380 -400-415 V 50 Hz, protection framework and electric supplied on request. Versions single phase 220-230 V 50 Hz, electrical panel provided with full protection and safety plug supplied series. Cable: standard on all versions 20 m type H07-RNF. DATA Characteristics Qmax: 18 m3 / h – Hmax: 116 m Temperature of pumped liquid: 0 ° C – max 40 ° C. The maximum amount of sand: 50 g/m3. Solids : 2.5 mm max. Minimum level of the liquid: 100mm from the bottom of the grill hood. Maximum depth of application: up to 70 m below the water level.